How do I know where to place holes on an instrument?












4















I've been trying to build a double reeded instrument out of plastic straws. I've run into a problem though, when I place fingering holes, the instrument doesn't seem to follow the $$f=/frac{nv}{4L}$$ formula. Is there a formula that would allow me to calculate where along the instrument I should place the holes?










share|improve this question























  • I guess the answer is guess! :D It may also be trial and error.

    – Xilpex
    5 hours ago
















4















I've been trying to build a double reeded instrument out of plastic straws. I've run into a problem though, when I place fingering holes, the instrument doesn't seem to follow the $$f=/frac{nv}{4L}$$ formula. Is there a formula that would allow me to calculate where along the instrument I should place the holes?










share|improve this question























  • I guess the answer is guess! :D It may also be trial and error.

    – Xilpex
    5 hours ago














4












4








4








I've been trying to build a double reeded instrument out of plastic straws. I've run into a problem though, when I place fingering holes, the instrument doesn't seem to follow the $$f=/frac{nv}{4L}$$ formula. Is there a formula that would allow me to calculate where along the instrument I should place the holes?










share|improve this question














I've been trying to build a double reeded instrument out of plastic straws. I've run into a problem though, when I place fingering holes, the instrument doesn't seem to follow the $$f=/frac{nv}{4L}$$ formula. Is there a formula that would allow me to calculate where along the instrument I should place the holes?







acoustics construction reeds






share|improve this question













share|improve this question











share|improve this question




share|improve this question










asked 5 hours ago









tox123tox123

1187




1187













  • I guess the answer is guess! :D It may also be trial and error.

    – Xilpex
    5 hours ago



















  • I guess the answer is guess! :D It may also be trial and error.

    – Xilpex
    5 hours ago

















I guess the answer is guess! :D It may also be trial and error.

– Xilpex
5 hours ago





I guess the answer is guess! :D It may also be trial and error.

– Xilpex
5 hours ago










2 Answers
2






active

oldest

votes


















3














The main problem is that it's an oversimplified assumption to consider an open hole as a perfect open boundary condition for the air column. In fact such a hole still has a significant impedance. On the other side, the mouthpiece is not a perfect closed (reeds) or open (flutes) boundary condition, and also a closed hole still affects the column somewhat. A pitch formula would need to take all those factors into account, which depend on hole size and bore. Doing this accurately would require a big CFD model.



In practice, probably almost every wind instrument maker has instead used empirical models, i.e. basically trial and error. It should certainly be possible to fit a formula to that which is more accurate than the overidealisation but still reasonably accurate, but whether one is available publicly I don't know.






share|improve this answer































    1














    In a perfect world, the fundamental pitch of a pipe is determined by f = v/2L, where v is the speed of sound and L is the length of the pipe.



    But we don't live in a perfect world.



    Placing a hole in the pipe shortens its length, but the new length - the effective length - isn't the distance to the hole, because that isn't the end of the pipe. The larger the hole, the more it will behave like the ideal. The smaller the hole, the longer the effective length will be.



    Because the hole size is a variable, you're not going to find a formula that's going to fit every situation. That's because the hole size is a variable in relation to the diameter of the tube: a 1cm hole in a 10cm tube will have a different effective length than a 1cm hole in a 9cm tube.



    Since no formula is going to work for all situations, you have do some trial and error. If the pitch is flat, you can enlarge the hole to shorten the effective length. If the pitch is sharp, you'll have to figure out a way to make that hole smaller (or make the whole tube longer - there's a reason woodwinds have multiple pieces!)



    There are other variables, too... conical bores behave differently than cylindrical ones. But I'm assuming you're using a cylindrical tube.






    share|improve this answer
























      Your Answer








      StackExchange.ready(function() {
      var channelOptions = {
      tags: "".split(" "),
      id: "240"
      };
      initTagRenderer("".split(" "), "".split(" "), channelOptions);

      StackExchange.using("externalEditor", function() {
      // Have to fire editor after snippets, if snippets enabled
      if (StackExchange.settings.snippets.snippetsEnabled) {
      StackExchange.using("snippets", function() {
      createEditor();
      });
      }
      else {
      createEditor();
      }
      });

      function createEditor() {
      StackExchange.prepareEditor({
      heartbeatType: 'answer',
      autoActivateHeartbeat: false,
      convertImagesToLinks: false,
      noModals: true,
      showLowRepImageUploadWarning: true,
      reputationToPostImages: null,
      bindNavPrevention: true,
      postfix: "",
      imageUploader: {
      brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
      contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
      allowUrls: true
      },
      noCode: true, onDemand: true,
      discardSelector: ".discard-answer"
      ,immediatelyShowMarkdownHelp:true
      });


      }
      });














      draft saved

      draft discarded


















      StackExchange.ready(
      function () {
      StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fmusic.stackexchange.com%2fquestions%2f82335%2fhow-do-i-know-where-to-place-holes-on-an-instrument%23new-answer', 'question_page');
      }
      );

      Post as a guest















      Required, but never shown

























      2 Answers
      2






      active

      oldest

      votes








      2 Answers
      2






      active

      oldest

      votes









      active

      oldest

      votes






      active

      oldest

      votes









      3














      The main problem is that it's an oversimplified assumption to consider an open hole as a perfect open boundary condition for the air column. In fact such a hole still has a significant impedance. On the other side, the mouthpiece is not a perfect closed (reeds) or open (flutes) boundary condition, and also a closed hole still affects the column somewhat. A pitch formula would need to take all those factors into account, which depend on hole size and bore. Doing this accurately would require a big CFD model.



      In practice, probably almost every wind instrument maker has instead used empirical models, i.e. basically trial and error. It should certainly be possible to fit a formula to that which is more accurate than the overidealisation but still reasonably accurate, but whether one is available publicly I don't know.






      share|improve this answer




























        3














        The main problem is that it's an oversimplified assumption to consider an open hole as a perfect open boundary condition for the air column. In fact such a hole still has a significant impedance. On the other side, the mouthpiece is not a perfect closed (reeds) or open (flutes) boundary condition, and also a closed hole still affects the column somewhat. A pitch formula would need to take all those factors into account, which depend on hole size and bore. Doing this accurately would require a big CFD model.



        In practice, probably almost every wind instrument maker has instead used empirical models, i.e. basically trial and error. It should certainly be possible to fit a formula to that which is more accurate than the overidealisation but still reasonably accurate, but whether one is available publicly I don't know.






        share|improve this answer


























          3












          3








          3







          The main problem is that it's an oversimplified assumption to consider an open hole as a perfect open boundary condition for the air column. In fact such a hole still has a significant impedance. On the other side, the mouthpiece is not a perfect closed (reeds) or open (flutes) boundary condition, and also a closed hole still affects the column somewhat. A pitch formula would need to take all those factors into account, which depend on hole size and bore. Doing this accurately would require a big CFD model.



          In practice, probably almost every wind instrument maker has instead used empirical models, i.e. basically trial and error. It should certainly be possible to fit a formula to that which is more accurate than the overidealisation but still reasonably accurate, but whether one is available publicly I don't know.






          share|improve this answer













          The main problem is that it's an oversimplified assumption to consider an open hole as a perfect open boundary condition for the air column. In fact such a hole still has a significant impedance. On the other side, the mouthpiece is not a perfect closed (reeds) or open (flutes) boundary condition, and also a closed hole still affects the column somewhat. A pitch formula would need to take all those factors into account, which depend on hole size and bore. Doing this accurately would require a big CFD model.



          In practice, probably almost every wind instrument maker has instead used empirical models, i.e. basically trial and error. It should certainly be possible to fit a formula to that which is more accurate than the overidealisation but still reasonably accurate, but whether one is available publicly I don't know.







          share|improve this answer












          share|improve this answer



          share|improve this answer










          answered 3 hours ago









          leftaroundaboutleftaroundabout

          20.7k3690




          20.7k3690























              1














              In a perfect world, the fundamental pitch of a pipe is determined by f = v/2L, where v is the speed of sound and L is the length of the pipe.



              But we don't live in a perfect world.



              Placing a hole in the pipe shortens its length, but the new length - the effective length - isn't the distance to the hole, because that isn't the end of the pipe. The larger the hole, the more it will behave like the ideal. The smaller the hole, the longer the effective length will be.



              Because the hole size is a variable, you're not going to find a formula that's going to fit every situation. That's because the hole size is a variable in relation to the diameter of the tube: a 1cm hole in a 10cm tube will have a different effective length than a 1cm hole in a 9cm tube.



              Since no formula is going to work for all situations, you have do some trial and error. If the pitch is flat, you can enlarge the hole to shorten the effective length. If the pitch is sharp, you'll have to figure out a way to make that hole smaller (or make the whole tube longer - there's a reason woodwinds have multiple pieces!)



              There are other variables, too... conical bores behave differently than cylindrical ones. But I'm assuming you're using a cylindrical tube.






              share|improve this answer




























                1














                In a perfect world, the fundamental pitch of a pipe is determined by f = v/2L, where v is the speed of sound and L is the length of the pipe.



                But we don't live in a perfect world.



                Placing a hole in the pipe shortens its length, but the new length - the effective length - isn't the distance to the hole, because that isn't the end of the pipe. The larger the hole, the more it will behave like the ideal. The smaller the hole, the longer the effective length will be.



                Because the hole size is a variable, you're not going to find a formula that's going to fit every situation. That's because the hole size is a variable in relation to the diameter of the tube: a 1cm hole in a 10cm tube will have a different effective length than a 1cm hole in a 9cm tube.



                Since no formula is going to work for all situations, you have do some trial and error. If the pitch is flat, you can enlarge the hole to shorten the effective length. If the pitch is sharp, you'll have to figure out a way to make that hole smaller (or make the whole tube longer - there's a reason woodwinds have multiple pieces!)



                There are other variables, too... conical bores behave differently than cylindrical ones. But I'm assuming you're using a cylindrical tube.






                share|improve this answer


























                  1












                  1








                  1







                  In a perfect world, the fundamental pitch of a pipe is determined by f = v/2L, where v is the speed of sound and L is the length of the pipe.



                  But we don't live in a perfect world.



                  Placing a hole in the pipe shortens its length, but the new length - the effective length - isn't the distance to the hole, because that isn't the end of the pipe. The larger the hole, the more it will behave like the ideal. The smaller the hole, the longer the effective length will be.



                  Because the hole size is a variable, you're not going to find a formula that's going to fit every situation. That's because the hole size is a variable in relation to the diameter of the tube: a 1cm hole in a 10cm tube will have a different effective length than a 1cm hole in a 9cm tube.



                  Since no formula is going to work for all situations, you have do some trial and error. If the pitch is flat, you can enlarge the hole to shorten the effective length. If the pitch is sharp, you'll have to figure out a way to make that hole smaller (or make the whole tube longer - there's a reason woodwinds have multiple pieces!)



                  There are other variables, too... conical bores behave differently than cylindrical ones. But I'm assuming you're using a cylindrical tube.






                  share|improve this answer













                  In a perfect world, the fundamental pitch of a pipe is determined by f = v/2L, where v is the speed of sound and L is the length of the pipe.



                  But we don't live in a perfect world.



                  Placing a hole in the pipe shortens its length, but the new length - the effective length - isn't the distance to the hole, because that isn't the end of the pipe. The larger the hole, the more it will behave like the ideal. The smaller the hole, the longer the effective length will be.



                  Because the hole size is a variable, you're not going to find a formula that's going to fit every situation. That's because the hole size is a variable in relation to the diameter of the tube: a 1cm hole in a 10cm tube will have a different effective length than a 1cm hole in a 9cm tube.



                  Since no formula is going to work for all situations, you have do some trial and error. If the pitch is flat, you can enlarge the hole to shorten the effective length. If the pitch is sharp, you'll have to figure out a way to make that hole smaller (or make the whole tube longer - there's a reason woodwinds have multiple pieces!)



                  There are other variables, too... conical bores behave differently than cylindrical ones. But I'm assuming you're using a cylindrical tube.







                  share|improve this answer












                  share|improve this answer



                  share|improve this answer










                  answered 1 hour ago









                  Tom SerbTom Serb

                  1,132110




                  1,132110






























                      draft saved

                      draft discarded




















































                      Thanks for contributing an answer to Music: Practice & Theory Stack Exchange!


                      • Please be sure to answer the question. Provide details and share your research!

                      But avoid



                      • Asking for help, clarification, or responding to other answers.

                      • Making statements based on opinion; back them up with references or personal experience.


                      To learn more, see our tips on writing great answers.




                      draft saved


                      draft discarded














                      StackExchange.ready(
                      function () {
                      StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fmusic.stackexchange.com%2fquestions%2f82335%2fhow-do-i-know-where-to-place-holes-on-an-instrument%23new-answer', 'question_page');
                      }
                      );

                      Post as a guest















                      Required, but never shown





















































                      Required, but never shown














                      Required, but never shown












                      Required, but never shown







                      Required, but never shown

































                      Required, but never shown














                      Required, but never shown












                      Required, but never shown







                      Required, but never shown







                      Popular posts from this blog

                      Liste der Baudenkmale in Friedland (Mecklenburg)

                      Single-Malt-Whisky

                      Czorneboh