Clipping shaded areas to a curve boundary












2















I am trying to draw the following graph, but I failed to achieve it.



enter image description here



What is wrong with this code



documentclass{beamer}
beamertemplatenavigationsymbolsempty
usepackage{verbatim}
usepackage{tikz}
usepackage{pgfplots}
usetikzlibrary{calc, backgrounds}
begin{document}
begin{frame}[t]
frametitle{}
begin{tikzpicture}[scale=.9, transform shape]
pgfmathsetmacro{incrmnty}{.86}
pgfmathsetmacro{incrmntx}{.86}
draw [thick](0,0) -- (incrmntx*10,0);
draw [thick](0,0) -- (0,incrmnty*10);
foreach y [evaluate=y as aff using int(y*10)]in {0,2,4,...,10}{ draw [black] (0,incrmnty*y) node [left, xshift=-.1cm] {aff} -- +(180:.12);}
foreach x [evaluate=x as aff using int(x*10)]in {0,2,4,...,10}{ draw [black] (incrmnty*x,0) node [below, yshift=-.25cm] {aff} -- +(-90:incrmntx*.2);}
draw [very thick, blue, looseness=.9] (0,0) to [out=15, in=-110] node [pos=.0] (ao) {} node [pos=.08] (aw){} node [pos=.146] (ah) {} node [pos=.24] (af) {} node [pos=.306] (av) {} node [pos=.4] (ax) {} node [pos=.484] (as) {} node [pos=.58] (ag) {} node [pos=.704] (an) {} node [pos=.8] (at) {} node [pos=1.] (aa) {} (incrmntx*10,incrmnty*10);
draw [very thick, red!70!black, looseness=1] (0,0) -- (incrmntx*10,incrmnty*10);
path[clip] (0,0) to [out=15, in=-110] (incrmntx*10,incrmnty*10);
begin{scope}[on background layer]
draw [thick, black!80!white, fill=black!65!white] (aa.center) node [black, xshift=.36cm, yshift=-3.cm] {} |- (aa.center|-0,0) -- (0,0) -- (aa.center);
draw [thick, black!80!white, fill=black!60!white] (at.center) node [black, xshift=.36cm, yshift=-3.cm] {$bf A_10$} |- (at.center|-0,0) -- (0,0) -- (at.center) -| (at.center-|0,0);
draw [thick, black!80!white, fill=black!55!white] (an.center) node [black, xshift=.28cm, yshift=-2.4cm] {$bf A_9$} |- (an.center|-0,0) -- (0,0) -- (an.center) -| (an.center-|0,0);
draw [thick, black!80!white, fill=black!50!white] (ag.center) node [black, xshift=.28cm, yshift=-2.cm] {$bf A_8$} |- (ag.center|-0,0) -- (0,0) -- (ag.center) -| (ag.center-|0,0);
draw [thick, black!80!white, fill=black!45!white] (as.center) node [black, xshift=.28cm, yshift=-1.46cm] {$bf A_7$} |- (as.center|-0,0) -- (0,0) -- (as.center) -| (as.center-|0,0);
draw [thick, black!80!white, fill=black!40!white] (ax.center) node [black, xshift=.28cm, yshift=-1.2cm] {$bf A_6$} |- (ax.center|-0,0)-- (0,0) -- (ax.center) -| (ax.center-|0,0);
draw [thick, black!80!white, fill=black!35!white] (av.center) node [black, xshift=.28cm, yshift=-.9cm] {$bf A_5$} |- (av.center|-0,0) -- (0,0) -- (av.center) -| (av.center-|0,0);
draw [thick, black!80!white, fill=black!30!white] (af.center) node [black, xshift=.28cm, yshift=-.68cm] {$bf A_4$} |- (af.center|-0,0)-- (0,0) -- (af.center) -| (af.center-|0,0);
draw [thick, black!80!white, fill=black!25!white] (ah.center) node [black, xshift=.28cm, yshift=-.4cm] {$bf A_3$} |- (ah.center|-0,0) -- (0,0) -- (ah.center) -| (ah.center-|0,0);
draw [thick, black!80!white, fill=black!20!white] (aw.center) node [black, xshift=.28cm, yshift=-.16cm] {$bf A_2$} |- (aw.center|-0,0) -- (0,0) -- (aw.center) -| (aw.center-|0,0);
draw [thick, black!80!white, fill=black!20!white] (ao.center) node [black, xshift=.8cm, yshift=0cm] {$bf A_1$} |- (ao.center|-0,0) -- (0,0) -- (ao.center) -| (ao.center-|0,0);
end{scope}
end{tikzpicture}
end{frame}
end{document}


It generated the following drawing



enter image description here



The following comments should be fulfilled




  1. the shaded areas should be confined below the blue curve, to the
    x-axis.


  2. there should be no line connecting the nodes on the blue curve with
    position (0,0).


  3. the relations to y60 and y20 are not correct.











share|improve this question





























    2















    I am trying to draw the following graph, but I failed to achieve it.



    enter image description here



    What is wrong with this code



    documentclass{beamer}
    beamertemplatenavigationsymbolsempty
    usepackage{verbatim}
    usepackage{tikz}
    usepackage{pgfplots}
    usetikzlibrary{calc, backgrounds}
    begin{document}
    begin{frame}[t]
    frametitle{}
    begin{tikzpicture}[scale=.9, transform shape]
    pgfmathsetmacro{incrmnty}{.86}
    pgfmathsetmacro{incrmntx}{.86}
    draw [thick](0,0) -- (incrmntx*10,0);
    draw [thick](0,0) -- (0,incrmnty*10);
    foreach y [evaluate=y as aff using int(y*10)]in {0,2,4,...,10}{ draw [black] (0,incrmnty*y) node [left, xshift=-.1cm] {aff} -- +(180:.12);}
    foreach x [evaluate=x as aff using int(x*10)]in {0,2,4,...,10}{ draw [black] (incrmnty*x,0) node [below, yshift=-.25cm] {aff} -- +(-90:incrmntx*.2);}
    draw [very thick, blue, looseness=.9] (0,0) to [out=15, in=-110] node [pos=.0] (ao) {} node [pos=.08] (aw){} node [pos=.146] (ah) {} node [pos=.24] (af) {} node [pos=.306] (av) {} node [pos=.4] (ax) {} node [pos=.484] (as) {} node [pos=.58] (ag) {} node [pos=.704] (an) {} node [pos=.8] (at) {} node [pos=1.] (aa) {} (incrmntx*10,incrmnty*10);
    draw [very thick, red!70!black, looseness=1] (0,0) -- (incrmntx*10,incrmnty*10);
    path[clip] (0,0) to [out=15, in=-110] (incrmntx*10,incrmnty*10);
    begin{scope}[on background layer]
    draw [thick, black!80!white, fill=black!65!white] (aa.center) node [black, xshift=.36cm, yshift=-3.cm] {} |- (aa.center|-0,0) -- (0,0) -- (aa.center);
    draw [thick, black!80!white, fill=black!60!white] (at.center) node [black, xshift=.36cm, yshift=-3.cm] {$bf A_10$} |- (at.center|-0,0) -- (0,0) -- (at.center) -| (at.center-|0,0);
    draw [thick, black!80!white, fill=black!55!white] (an.center) node [black, xshift=.28cm, yshift=-2.4cm] {$bf A_9$} |- (an.center|-0,0) -- (0,0) -- (an.center) -| (an.center-|0,0);
    draw [thick, black!80!white, fill=black!50!white] (ag.center) node [black, xshift=.28cm, yshift=-2.cm] {$bf A_8$} |- (ag.center|-0,0) -- (0,0) -- (ag.center) -| (ag.center-|0,0);
    draw [thick, black!80!white, fill=black!45!white] (as.center) node [black, xshift=.28cm, yshift=-1.46cm] {$bf A_7$} |- (as.center|-0,0) -- (0,0) -- (as.center) -| (as.center-|0,0);
    draw [thick, black!80!white, fill=black!40!white] (ax.center) node [black, xshift=.28cm, yshift=-1.2cm] {$bf A_6$} |- (ax.center|-0,0)-- (0,0) -- (ax.center) -| (ax.center-|0,0);
    draw [thick, black!80!white, fill=black!35!white] (av.center) node [black, xshift=.28cm, yshift=-.9cm] {$bf A_5$} |- (av.center|-0,0) -- (0,0) -- (av.center) -| (av.center-|0,0);
    draw [thick, black!80!white, fill=black!30!white] (af.center) node [black, xshift=.28cm, yshift=-.68cm] {$bf A_4$} |- (af.center|-0,0)-- (0,0) -- (af.center) -| (af.center-|0,0);
    draw [thick, black!80!white, fill=black!25!white] (ah.center) node [black, xshift=.28cm, yshift=-.4cm] {$bf A_3$} |- (ah.center|-0,0) -- (0,0) -- (ah.center) -| (ah.center-|0,0);
    draw [thick, black!80!white, fill=black!20!white] (aw.center) node [black, xshift=.28cm, yshift=-.16cm] {$bf A_2$} |- (aw.center|-0,0) -- (0,0) -- (aw.center) -| (aw.center-|0,0);
    draw [thick, black!80!white, fill=black!20!white] (ao.center) node [black, xshift=.8cm, yshift=0cm] {$bf A_1$} |- (ao.center|-0,0) -- (0,0) -- (ao.center) -| (ao.center-|0,0);
    end{scope}
    end{tikzpicture}
    end{frame}
    end{document}


    It generated the following drawing



    enter image description here



    The following comments should be fulfilled




    1. the shaded areas should be confined below the blue curve, to the
      x-axis.


    2. there should be no line connecting the nodes on the blue curve with
      position (0,0).


    3. the relations to y60 and y20 are not correct.











    share|improve this question



























      2












      2








      2








      I am trying to draw the following graph, but I failed to achieve it.



      enter image description here



      What is wrong with this code



      documentclass{beamer}
      beamertemplatenavigationsymbolsempty
      usepackage{verbatim}
      usepackage{tikz}
      usepackage{pgfplots}
      usetikzlibrary{calc, backgrounds}
      begin{document}
      begin{frame}[t]
      frametitle{}
      begin{tikzpicture}[scale=.9, transform shape]
      pgfmathsetmacro{incrmnty}{.86}
      pgfmathsetmacro{incrmntx}{.86}
      draw [thick](0,0) -- (incrmntx*10,0);
      draw [thick](0,0) -- (0,incrmnty*10);
      foreach y [evaluate=y as aff using int(y*10)]in {0,2,4,...,10}{ draw [black] (0,incrmnty*y) node [left, xshift=-.1cm] {aff} -- +(180:.12);}
      foreach x [evaluate=x as aff using int(x*10)]in {0,2,4,...,10}{ draw [black] (incrmnty*x,0) node [below, yshift=-.25cm] {aff} -- +(-90:incrmntx*.2);}
      draw [very thick, blue, looseness=.9] (0,0) to [out=15, in=-110] node [pos=.0] (ao) {} node [pos=.08] (aw){} node [pos=.146] (ah) {} node [pos=.24] (af) {} node [pos=.306] (av) {} node [pos=.4] (ax) {} node [pos=.484] (as) {} node [pos=.58] (ag) {} node [pos=.704] (an) {} node [pos=.8] (at) {} node [pos=1.] (aa) {} (incrmntx*10,incrmnty*10);
      draw [very thick, red!70!black, looseness=1] (0,0) -- (incrmntx*10,incrmnty*10);
      path[clip] (0,0) to [out=15, in=-110] (incrmntx*10,incrmnty*10);
      begin{scope}[on background layer]
      draw [thick, black!80!white, fill=black!65!white] (aa.center) node [black, xshift=.36cm, yshift=-3.cm] {} |- (aa.center|-0,0) -- (0,0) -- (aa.center);
      draw [thick, black!80!white, fill=black!60!white] (at.center) node [black, xshift=.36cm, yshift=-3.cm] {$bf A_10$} |- (at.center|-0,0) -- (0,0) -- (at.center) -| (at.center-|0,0);
      draw [thick, black!80!white, fill=black!55!white] (an.center) node [black, xshift=.28cm, yshift=-2.4cm] {$bf A_9$} |- (an.center|-0,0) -- (0,0) -- (an.center) -| (an.center-|0,0);
      draw [thick, black!80!white, fill=black!50!white] (ag.center) node [black, xshift=.28cm, yshift=-2.cm] {$bf A_8$} |- (ag.center|-0,0) -- (0,0) -- (ag.center) -| (ag.center-|0,0);
      draw [thick, black!80!white, fill=black!45!white] (as.center) node [black, xshift=.28cm, yshift=-1.46cm] {$bf A_7$} |- (as.center|-0,0) -- (0,0) -- (as.center) -| (as.center-|0,0);
      draw [thick, black!80!white, fill=black!40!white] (ax.center) node [black, xshift=.28cm, yshift=-1.2cm] {$bf A_6$} |- (ax.center|-0,0)-- (0,0) -- (ax.center) -| (ax.center-|0,0);
      draw [thick, black!80!white, fill=black!35!white] (av.center) node [black, xshift=.28cm, yshift=-.9cm] {$bf A_5$} |- (av.center|-0,0) -- (0,0) -- (av.center) -| (av.center-|0,0);
      draw [thick, black!80!white, fill=black!30!white] (af.center) node [black, xshift=.28cm, yshift=-.68cm] {$bf A_4$} |- (af.center|-0,0)-- (0,0) -- (af.center) -| (af.center-|0,0);
      draw [thick, black!80!white, fill=black!25!white] (ah.center) node [black, xshift=.28cm, yshift=-.4cm] {$bf A_3$} |- (ah.center|-0,0) -- (0,0) -- (ah.center) -| (ah.center-|0,0);
      draw [thick, black!80!white, fill=black!20!white] (aw.center) node [black, xshift=.28cm, yshift=-.16cm] {$bf A_2$} |- (aw.center|-0,0) -- (0,0) -- (aw.center) -| (aw.center-|0,0);
      draw [thick, black!80!white, fill=black!20!white] (ao.center) node [black, xshift=.8cm, yshift=0cm] {$bf A_1$} |- (ao.center|-0,0) -- (0,0) -- (ao.center) -| (ao.center-|0,0);
      end{scope}
      end{tikzpicture}
      end{frame}
      end{document}


      It generated the following drawing



      enter image description here



      The following comments should be fulfilled




      1. the shaded areas should be confined below the blue curve, to the
        x-axis.


      2. there should be no line connecting the nodes on the blue curve with
        position (0,0).


      3. the relations to y60 and y20 are not correct.











      share|improve this question
















      I am trying to draw the following graph, but I failed to achieve it.



      enter image description here



      What is wrong with this code



      documentclass{beamer}
      beamertemplatenavigationsymbolsempty
      usepackage{verbatim}
      usepackage{tikz}
      usepackage{pgfplots}
      usetikzlibrary{calc, backgrounds}
      begin{document}
      begin{frame}[t]
      frametitle{}
      begin{tikzpicture}[scale=.9, transform shape]
      pgfmathsetmacro{incrmnty}{.86}
      pgfmathsetmacro{incrmntx}{.86}
      draw [thick](0,0) -- (incrmntx*10,0);
      draw [thick](0,0) -- (0,incrmnty*10);
      foreach y [evaluate=y as aff using int(y*10)]in {0,2,4,...,10}{ draw [black] (0,incrmnty*y) node [left, xshift=-.1cm] {aff} -- +(180:.12);}
      foreach x [evaluate=x as aff using int(x*10)]in {0,2,4,...,10}{ draw [black] (incrmnty*x,0) node [below, yshift=-.25cm] {aff} -- +(-90:incrmntx*.2);}
      draw [very thick, blue, looseness=.9] (0,0) to [out=15, in=-110] node [pos=.0] (ao) {} node [pos=.08] (aw){} node [pos=.146] (ah) {} node [pos=.24] (af) {} node [pos=.306] (av) {} node [pos=.4] (ax) {} node [pos=.484] (as) {} node [pos=.58] (ag) {} node [pos=.704] (an) {} node [pos=.8] (at) {} node [pos=1.] (aa) {} (incrmntx*10,incrmnty*10);
      draw [very thick, red!70!black, looseness=1] (0,0) -- (incrmntx*10,incrmnty*10);
      path[clip] (0,0) to [out=15, in=-110] (incrmntx*10,incrmnty*10);
      begin{scope}[on background layer]
      draw [thick, black!80!white, fill=black!65!white] (aa.center) node [black, xshift=.36cm, yshift=-3.cm] {} |- (aa.center|-0,0) -- (0,0) -- (aa.center);
      draw [thick, black!80!white, fill=black!60!white] (at.center) node [black, xshift=.36cm, yshift=-3.cm] {$bf A_10$} |- (at.center|-0,0) -- (0,0) -- (at.center) -| (at.center-|0,0);
      draw [thick, black!80!white, fill=black!55!white] (an.center) node [black, xshift=.28cm, yshift=-2.4cm] {$bf A_9$} |- (an.center|-0,0) -- (0,0) -- (an.center) -| (an.center-|0,0);
      draw [thick, black!80!white, fill=black!50!white] (ag.center) node [black, xshift=.28cm, yshift=-2.cm] {$bf A_8$} |- (ag.center|-0,0) -- (0,0) -- (ag.center) -| (ag.center-|0,0);
      draw [thick, black!80!white, fill=black!45!white] (as.center) node [black, xshift=.28cm, yshift=-1.46cm] {$bf A_7$} |- (as.center|-0,0) -- (0,0) -- (as.center) -| (as.center-|0,0);
      draw [thick, black!80!white, fill=black!40!white] (ax.center) node [black, xshift=.28cm, yshift=-1.2cm] {$bf A_6$} |- (ax.center|-0,0)-- (0,0) -- (ax.center) -| (ax.center-|0,0);
      draw [thick, black!80!white, fill=black!35!white] (av.center) node [black, xshift=.28cm, yshift=-.9cm] {$bf A_5$} |- (av.center|-0,0) -- (0,0) -- (av.center) -| (av.center-|0,0);
      draw [thick, black!80!white, fill=black!30!white] (af.center) node [black, xshift=.28cm, yshift=-.68cm] {$bf A_4$} |- (af.center|-0,0)-- (0,0) -- (af.center) -| (af.center-|0,0);
      draw [thick, black!80!white, fill=black!25!white] (ah.center) node [black, xshift=.28cm, yshift=-.4cm] {$bf A_3$} |- (ah.center|-0,0) -- (0,0) -- (ah.center) -| (ah.center-|0,0);
      draw [thick, black!80!white, fill=black!20!white] (aw.center) node [black, xshift=.28cm, yshift=-.16cm] {$bf A_2$} |- (aw.center|-0,0) -- (0,0) -- (aw.center) -| (aw.center-|0,0);
      draw [thick, black!80!white, fill=black!20!white] (ao.center) node [black, xshift=.8cm, yshift=0cm] {$bf A_1$} |- (ao.center|-0,0) -- (0,0) -- (ao.center) -| (ao.center-|0,0);
      end{scope}
      end{tikzpicture}
      end{frame}
      end{document}


      It generated the following drawing



      enter image description here



      The following comments should be fulfilled




      1. the shaded areas should be confined below the blue curve, to the
        x-axis.


      2. there should be no line connecting the nodes on the blue curve with
        position (0,0).


      3. the relations to y60 and y20 are not correct.








      tikz-pgf path-clipping






      share|improve this question















      share|improve this question













      share|improve this question




      share|improve this question








      edited 47 mins ago









      Martin Scharrer

      201k45638819




      201k45638819










      asked 1 hour ago









      HanyHany

      1,156416




      1,156416






















          3 Answers
          3






          active

          oldest

          votes


















          2














          You need to place the clipping path into the scope, not before it, and close the clipping path with e.g. |- cycle or similar. Also you should need the same parameters as with the actual line. The looseness value was missing.



          This solves points 1 and 2 of your list. I don't understand what you mean with point 3.



          I also fixed your A_10 which needs to be written as A_{10}.



          documentclass{beamer}
          beamertemplatenavigationsymbolsempty
          usepackage{verbatim}
          usepackage{tikz}
          usepackage{pgfplots}
          usetikzlibrary{calc, backgrounds}
          begin{document}
          begin{frame}[t]
          frametitle{}
          begin{tikzpicture}[scale=.9, transform shape]
          pgfmathsetmacro{incrmnty}{.86}
          pgfmathsetmacro{incrmntx}{.86}

          draw [thick](0,0) -- (incrmntx*10,0);
          draw [thick](0,0) -- (0,incrmnty*10);

          foreach y [evaluate=y as aff using int(y*10)] in {0,2,4,...,10}{
          draw [black] (0,incrmnty*y) node [left, xshift=-.1cm] {aff} -- +(180:.12);
          }

          foreach x [evaluate=x as aff using int(x*10)] in {0,2,4,...,10}{
          draw [black] (incrmnty*x,0) node [below, yshift=-.25cm] {aff} -- +(-90:incrmntx*.2);
          }

          draw [very thick, blue, looseness=.9] (0,0) to [out=15, in=-110]
          node [pos=.0] (ao) {}
          node [pos=.08] (aw){}
          node [pos=.146] (ah) {}
          node [pos=.24] (af) {}
          node [pos=.306] (av) {}
          node [pos=.4] (ax) {}
          node [pos=.484] (as) {}
          node [pos=.58] (ag) {}
          node [pos=.704] (an) {}
          node [pos=.8] (at) {}
          node [pos=1.] (aa) {}
          (incrmntx*10,incrmnty*10);

          draw [very thick, red!70!black, looseness=1] (0,0) -- (incrmntx*10,incrmnty*10);
          begin{scope}[on background layer]
          path [clip, looseness=.9] (0,0) to [out=15, in=-110] (incrmntx*10,incrmnty*10) |- (0, -1) -- cycle;
          draw [thick, black!80!white, fill=green!65!white] (aa.center) node [black, xshift=.36cm, yshift=-3.cm] {X} |- (aa.center|-0,0) -- (0,0) -- (aa.center);
          draw [thick, black!80!white, fill=black!60!white] (at.center) node [black, xshift=.36cm, yshift=-3.cm] {$bf A_{10}$} |- (at.center|-0,0) -- (0,0) -- (at.center) -| (at.center-|0,0);
          draw [thick, black!80!white, fill=black!55!white] (an.center) node [black, xshift=.28cm, yshift=-2.4cm] {$bf A_9$} |- (an.center|-0,0) -- (0,0) -- (an.center) -| (an.center-|0,0);
          draw [thick, black!80!white, fill=black!50!white] (ag.center) node [black, xshift=.28cm, yshift=-2.cm] {$bf A_8$} |- (ag.center|-0,0) -- (0,0) -- (ag.center) -| (ag.center-|0,0);
          draw [thick, black!80!white, fill=black!45!white] (as.center) node [black, xshift=.28cm, yshift=-1.46cm] {$bf A_7$} |- (as.center|-0,0) -- (0,0) -- (as.center) -| (as.center-|0,0);
          draw [thick, black!80!white, fill=black!40!white] (ax.center) node [black, xshift=.28cm, yshift=-1.2cm] {$bf A_6$} |- (ax.center|-0,0)-- (0,0) -- (ax.center) -| (ax.center-|0,0);
          draw [thick, black!80!white, fill=black!35!white] (av.center) node [black, xshift=.28cm, yshift=-.9cm] {$bf A_5$} |- (av.center|-0,0) -- (0,0) -- (av.center) -| (av.center-|0,0);
          draw [thick, black!80!white, fill=black!30!white] (af.center) node [black, xshift=.28cm, yshift=-.68cm] {$bf A_4$} |- (af.center|-0,0)-- (0,0) -- (af.center) -| (af.center-|0,0);
          draw [thick, black!80!white, fill=black!25!white] (ah.center) node [black, xshift=.28cm, yshift=-.4cm] {$bf A_3$} |- (ah.center|-0,0) -- (0,0) -- (ah.center) -| (ah.center-|0,0);
          draw [thick, black!80!white, fill=black!20!white] (aw.center) node [black, xshift=.28cm, yshift=-.16cm] {$bf A_2$} |- (aw.center|-0,0) -- (0,0) -- (aw.center) -| (aw.center-|0,0);
          draw [thick, black!80!white, fill=black!20!white] (ao.center) node [black, xshift=.8cm, yshift=0cm] {$bf A_1$} |- (ao.center|-0,0) -- (0,0) -- (ao.center) -| (ao.center-|0,0);
          end{scope}
          end{tikzpicture}
          end{frame}
          end{document}


          enter image description here






          share|improve this answer































            1














            Similar to Martin Scharrer's nice answer but with loops to make the code shorter. (And yes, the looseness was missing in the clip path.)



            documentclass{beamer}
            beamertemplatenavigationsymbolsempty
            usepackage{verbatim}
            usepackage{tikz}
            usetikzlibrary{backgrounds}
            begin{document}
            begin{frame}[t]
            frametitle{}
            begin{tikzpicture}[scale=.9, transform shape]
            pgfmathsetmacro{incrmnty}{.86}
            pgfmathsetmacro{incrmntx}{.86}
            draw [thick](0,0) -- (incrmntx*10,0);
            draw [thick](0,0) -- (0,incrmnty*10);
            foreach y [evaluate=y as aff using int(y*10)]in {0,2,4,...,10}
            { draw [black] (0,incrmnty*y) node [left, xshift=-.1cm] {aff} -- +(180:.12);}
            foreach x [evaluate=x as aff using int(x*10)]in {0,2,4,...,10}
            { draw [black] (incrmnty*x,0) node [below, yshift=-.25cm] {aff} -- +(-90:incrmntx*.2);}
            draw [very thick, blue] (0,0) to [out=15, in=-110, looseness=.9]
            coordinate [pos=.0] (ao) coordinate [pos=.08] (aw) coordinate [pos=.146] (ah)
            coordinate [pos=.24] (af) coordinate [pos=.306] (av) coordinate [pos=.4] (ax)
            coordinate [pos=.484] (as) coordinate [pos=.58] (ag) coordinate [pos=.704] (an)
            coordinate [pos=.8] (at) coordinate [pos=1.] (aa) (incrmntx*10,incrmnty*10);
            draw [very thick, red!70!black, looseness=1] (0,0) -- (incrmntx*10,incrmnty*10);
            begin{scope}[on background layer]
            path[clip,postaction={draw,green,line width=1mm}] (0,0)
            to [out=15, in=-110, looseness=.9] (incrmntx*10,incrmnty*10) |- cycle;
            foreach X [count=Y,evaluate=Y as Z using {int(12-Y)}] in {aa,at,an,ag,as,ax,av,af,ah,aw,ao}
            {pgfmathtruncatemacro{fullness}{70-5*Y}
            draw [thick, black!80!white, fill=black!fullness!white]
            (0,0) -- (X.center) |- cycle ;}
            end{scope}
            foreach X [count=Y,evaluate=Y as Z using {int(11-Y)}] in {at,an,ag,as,ax,av,af,ah,aw,ao}
            draw [thick] (X.center|-0,0) |- (X.center-| (0,0)node[pos=0.25,right]{$boldsymbol{A_{Z}}$};
            end{tikzpicture}
            end{frame}
            end{document}


            enter image description here






            share|improve this answer

































              0














              I have to go to work, I will come back this afternoon to explain the code if you need it. Sorry.



              documentclass{beamer}
              beamertemplatenavigationsymbolsempty
              usepackage{verbatim}
              usepackage{tikz}
              usepackage{pgfplots}
              usetikzlibrary{calc, backgrounds}
              begin{document}
              begin{frame}[t]
              frametitle{}
              begin{tikzpicture}[scale=.9, transform shape]
              pgfmathsetmacro{incrmnty}{.86}
              pgfmathsetmacro{incrmntx}{.86}
              draw [thick](0,0) -- (incrmntx*10,0);
              draw [thick](0,0) -- (0,incrmnty*10);
              foreach y [evaluate=y as aff using int(y*10)]in {0,2,4,...,10}{ draw [black] (0,incrmnty*y) node [left, xshift=-.1cm] {aff} -- +(180:.12);}
              foreach x [evaluate=x as aff using int(x*10)]in {0,2,4,...,10}{
              draw [black] (incrmnty*x,0) node [below, yshift=-.25cm] {aff} -- +(-90:incrmntx*.2);
              }
              draw [very thick, blue, looseness=.9] (0,0) to [out=15, in=-110] node [pos=.0] (ao) {} node [pos=.08] (aw){} node [pos=.146] (ah) {} node [pos=.24] (af) {} node [pos=.306] (av) {} node [pos=.4] (ax) {} node [pos=.484] (as) {} node [pos=.58] (ag) {} node [pos=.704] (an) {} node [pos=.8] (at) {at} node [pos=1.] (aa) {} (incrmntx*10,incrmnty*10);
              draw [very thick, red!70!black, looseness=1] (0,0) -- (incrmntx*10,incrmnty*10);
              path[clip] (0,0) to [out=15, in=-110] (incrmntx*10,incrmnty*10);
              begin{scope}[on background layer]
              draw [thick, black!80!white, fill=black!65!white] (aa.center |- 0,0)--(aa.center) --(at.center) |- (at.center |- 0,0) -- cycle;
              draw [thick, black!80!white, fill=black!60!white] (at.center) node [black, xshift=.36cm, yshift=-3.cm] {$bf A_10$} --(an.center) |-(at.center |- 0,0) --cycle;
              draw [thick, black!80!white, fill=black!55!white] (an.center) node [black, xshift=.28cm, yshift=-2.4cm] {$bf A_9$} -- (ag.center)|- (an.center|- 0,0) -- cycle;
              draw [thick, black!80!white, fill=black!50!white] (ag.center) node [black, xshift=.28cm, yshift=-2.cm] {$bf A_8$} --(as.center) |- (ag.center|-0,0) -- cycle;
              draw [thick, black!80!white, fill=black!45!white] (as.center) node [black, xshift=.28cm, yshift=-1.46cm] {$bf A_7$} --(ax.center)|- (as.center|-0,0) -- cycle;
              draw [thick, black!80!white, fill=black!40!white] (ax.center) node [black, xshift=.28cm, yshift=-1.2cm] {$bf A_6$} -- (av.center)|- (ax.center|-0,0)-- cycle;
              draw [thick, black!80!white, fill=black!35!white] (av.center) node [black, xshift=.28cm, yshift=-.9cm] {$bf A_5$} --(af.center)|- (av.center|-0,0) -- cycle;
              draw [thick, black!80!white, fill=black!30!white] (af.center) node [black, xshift=.28cm, yshift=-.68cm] {$bf A_4$} --(ah.center)|- (af.center|-0,0)-- cycle;
              draw [thick, black!80!white, fill=black!25!white] (ah.center) node [black, xshift=.28cm, yshift=-.4cm] {$bf A_3$} --(aw.center)|- (ah.center|-0,0) -- cycle;
              draw [thick, black!80!white, fill=black!20!white] (aw.center) node [black, xshift=.28cm, yshift=-.16cm] {$bf A_2$} --(ao.center)|- (aw.center|-0,0) -- cycle;
              %draw [thick, black!80!white, fill=black!20!white] (ao.center) node [black, xshift=.8cm, yshift=0cm] {$bf A_1$} |- (ao.center|-0,0) -- (0,0) -- (ao.center) -| (ao.center-|0,0);
              end{scope}
              end{tikzpicture}
              end{frame}
              end{document}


              screenshot






              share|improve this answer























                Your Answer








                StackExchange.ready(function() {
                var channelOptions = {
                tags: "".split(" "),
                id: "85"
                };
                initTagRenderer("".split(" "), "".split(" "), channelOptions);

                StackExchange.using("externalEditor", function() {
                // Have to fire editor after snippets, if snippets enabled
                if (StackExchange.settings.snippets.snippetsEnabled) {
                StackExchange.using("snippets", function() {
                createEditor();
                });
                }
                else {
                createEditor();
                }
                });

                function createEditor() {
                StackExchange.prepareEditor({
                heartbeatType: 'answer',
                autoActivateHeartbeat: false,
                convertImagesToLinks: false,
                noModals: true,
                showLowRepImageUploadWarning: true,
                reputationToPostImages: null,
                bindNavPrevention: true,
                postfix: "",
                imageUploader: {
                brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
                contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
                allowUrls: true
                },
                onDemand: true,
                discardSelector: ".discard-answer"
                ,immediatelyShowMarkdownHelp:true
                });


                }
                });














                draft saved

                draft discarded


















                StackExchange.ready(
                function () {
                StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2ftex.stackexchange.com%2fquestions%2f473712%2fclipping-shaded-areas-to-a-curve-boundary%23new-answer', 'question_page');
                }
                );

                Post as a guest















                Required, but never shown

























                3 Answers
                3






                active

                oldest

                votes








                3 Answers
                3






                active

                oldest

                votes









                active

                oldest

                votes






                active

                oldest

                votes









                2














                You need to place the clipping path into the scope, not before it, and close the clipping path with e.g. |- cycle or similar. Also you should need the same parameters as with the actual line. The looseness value was missing.



                This solves points 1 and 2 of your list. I don't understand what you mean with point 3.



                I also fixed your A_10 which needs to be written as A_{10}.



                documentclass{beamer}
                beamertemplatenavigationsymbolsempty
                usepackage{verbatim}
                usepackage{tikz}
                usepackage{pgfplots}
                usetikzlibrary{calc, backgrounds}
                begin{document}
                begin{frame}[t]
                frametitle{}
                begin{tikzpicture}[scale=.9, transform shape]
                pgfmathsetmacro{incrmnty}{.86}
                pgfmathsetmacro{incrmntx}{.86}

                draw [thick](0,0) -- (incrmntx*10,0);
                draw [thick](0,0) -- (0,incrmnty*10);

                foreach y [evaluate=y as aff using int(y*10)] in {0,2,4,...,10}{
                draw [black] (0,incrmnty*y) node [left, xshift=-.1cm] {aff} -- +(180:.12);
                }

                foreach x [evaluate=x as aff using int(x*10)] in {0,2,4,...,10}{
                draw [black] (incrmnty*x,0) node [below, yshift=-.25cm] {aff} -- +(-90:incrmntx*.2);
                }

                draw [very thick, blue, looseness=.9] (0,0) to [out=15, in=-110]
                node [pos=.0] (ao) {}
                node [pos=.08] (aw){}
                node [pos=.146] (ah) {}
                node [pos=.24] (af) {}
                node [pos=.306] (av) {}
                node [pos=.4] (ax) {}
                node [pos=.484] (as) {}
                node [pos=.58] (ag) {}
                node [pos=.704] (an) {}
                node [pos=.8] (at) {}
                node [pos=1.] (aa) {}
                (incrmntx*10,incrmnty*10);

                draw [very thick, red!70!black, looseness=1] (0,0) -- (incrmntx*10,incrmnty*10);
                begin{scope}[on background layer]
                path [clip, looseness=.9] (0,0) to [out=15, in=-110] (incrmntx*10,incrmnty*10) |- (0, -1) -- cycle;
                draw [thick, black!80!white, fill=green!65!white] (aa.center) node [black, xshift=.36cm, yshift=-3.cm] {X} |- (aa.center|-0,0) -- (0,0) -- (aa.center);
                draw [thick, black!80!white, fill=black!60!white] (at.center) node [black, xshift=.36cm, yshift=-3.cm] {$bf A_{10}$} |- (at.center|-0,0) -- (0,0) -- (at.center) -| (at.center-|0,0);
                draw [thick, black!80!white, fill=black!55!white] (an.center) node [black, xshift=.28cm, yshift=-2.4cm] {$bf A_9$} |- (an.center|-0,0) -- (0,0) -- (an.center) -| (an.center-|0,0);
                draw [thick, black!80!white, fill=black!50!white] (ag.center) node [black, xshift=.28cm, yshift=-2.cm] {$bf A_8$} |- (ag.center|-0,0) -- (0,0) -- (ag.center) -| (ag.center-|0,0);
                draw [thick, black!80!white, fill=black!45!white] (as.center) node [black, xshift=.28cm, yshift=-1.46cm] {$bf A_7$} |- (as.center|-0,0) -- (0,0) -- (as.center) -| (as.center-|0,0);
                draw [thick, black!80!white, fill=black!40!white] (ax.center) node [black, xshift=.28cm, yshift=-1.2cm] {$bf A_6$} |- (ax.center|-0,0)-- (0,0) -- (ax.center) -| (ax.center-|0,0);
                draw [thick, black!80!white, fill=black!35!white] (av.center) node [black, xshift=.28cm, yshift=-.9cm] {$bf A_5$} |- (av.center|-0,0) -- (0,0) -- (av.center) -| (av.center-|0,0);
                draw [thick, black!80!white, fill=black!30!white] (af.center) node [black, xshift=.28cm, yshift=-.68cm] {$bf A_4$} |- (af.center|-0,0)-- (0,0) -- (af.center) -| (af.center-|0,0);
                draw [thick, black!80!white, fill=black!25!white] (ah.center) node [black, xshift=.28cm, yshift=-.4cm] {$bf A_3$} |- (ah.center|-0,0) -- (0,0) -- (ah.center) -| (ah.center-|0,0);
                draw [thick, black!80!white, fill=black!20!white] (aw.center) node [black, xshift=.28cm, yshift=-.16cm] {$bf A_2$} |- (aw.center|-0,0) -- (0,0) -- (aw.center) -| (aw.center-|0,0);
                draw [thick, black!80!white, fill=black!20!white] (ao.center) node [black, xshift=.8cm, yshift=0cm] {$bf A_1$} |- (ao.center|-0,0) -- (0,0) -- (ao.center) -| (ao.center-|0,0);
                end{scope}
                end{tikzpicture}
                end{frame}
                end{document}


                enter image description here






                share|improve this answer




























                  2














                  You need to place the clipping path into the scope, not before it, and close the clipping path with e.g. |- cycle or similar. Also you should need the same parameters as with the actual line. The looseness value was missing.



                  This solves points 1 and 2 of your list. I don't understand what you mean with point 3.



                  I also fixed your A_10 which needs to be written as A_{10}.



                  documentclass{beamer}
                  beamertemplatenavigationsymbolsempty
                  usepackage{verbatim}
                  usepackage{tikz}
                  usepackage{pgfplots}
                  usetikzlibrary{calc, backgrounds}
                  begin{document}
                  begin{frame}[t]
                  frametitle{}
                  begin{tikzpicture}[scale=.9, transform shape]
                  pgfmathsetmacro{incrmnty}{.86}
                  pgfmathsetmacro{incrmntx}{.86}

                  draw [thick](0,0) -- (incrmntx*10,0);
                  draw [thick](0,0) -- (0,incrmnty*10);

                  foreach y [evaluate=y as aff using int(y*10)] in {0,2,4,...,10}{
                  draw [black] (0,incrmnty*y) node [left, xshift=-.1cm] {aff} -- +(180:.12);
                  }

                  foreach x [evaluate=x as aff using int(x*10)] in {0,2,4,...,10}{
                  draw [black] (incrmnty*x,0) node [below, yshift=-.25cm] {aff} -- +(-90:incrmntx*.2);
                  }

                  draw [very thick, blue, looseness=.9] (0,0) to [out=15, in=-110]
                  node [pos=.0] (ao) {}
                  node [pos=.08] (aw){}
                  node [pos=.146] (ah) {}
                  node [pos=.24] (af) {}
                  node [pos=.306] (av) {}
                  node [pos=.4] (ax) {}
                  node [pos=.484] (as) {}
                  node [pos=.58] (ag) {}
                  node [pos=.704] (an) {}
                  node [pos=.8] (at) {}
                  node [pos=1.] (aa) {}
                  (incrmntx*10,incrmnty*10);

                  draw [very thick, red!70!black, looseness=1] (0,0) -- (incrmntx*10,incrmnty*10);
                  begin{scope}[on background layer]
                  path [clip, looseness=.9] (0,0) to [out=15, in=-110] (incrmntx*10,incrmnty*10) |- (0, -1) -- cycle;
                  draw [thick, black!80!white, fill=green!65!white] (aa.center) node [black, xshift=.36cm, yshift=-3.cm] {X} |- (aa.center|-0,0) -- (0,0) -- (aa.center);
                  draw [thick, black!80!white, fill=black!60!white] (at.center) node [black, xshift=.36cm, yshift=-3.cm] {$bf A_{10}$} |- (at.center|-0,0) -- (0,0) -- (at.center) -| (at.center-|0,0);
                  draw [thick, black!80!white, fill=black!55!white] (an.center) node [black, xshift=.28cm, yshift=-2.4cm] {$bf A_9$} |- (an.center|-0,0) -- (0,0) -- (an.center) -| (an.center-|0,0);
                  draw [thick, black!80!white, fill=black!50!white] (ag.center) node [black, xshift=.28cm, yshift=-2.cm] {$bf A_8$} |- (ag.center|-0,0) -- (0,0) -- (ag.center) -| (ag.center-|0,0);
                  draw [thick, black!80!white, fill=black!45!white] (as.center) node [black, xshift=.28cm, yshift=-1.46cm] {$bf A_7$} |- (as.center|-0,0) -- (0,0) -- (as.center) -| (as.center-|0,0);
                  draw [thick, black!80!white, fill=black!40!white] (ax.center) node [black, xshift=.28cm, yshift=-1.2cm] {$bf A_6$} |- (ax.center|-0,0)-- (0,0) -- (ax.center) -| (ax.center-|0,0);
                  draw [thick, black!80!white, fill=black!35!white] (av.center) node [black, xshift=.28cm, yshift=-.9cm] {$bf A_5$} |- (av.center|-0,0) -- (0,0) -- (av.center) -| (av.center-|0,0);
                  draw [thick, black!80!white, fill=black!30!white] (af.center) node [black, xshift=.28cm, yshift=-.68cm] {$bf A_4$} |- (af.center|-0,0)-- (0,0) -- (af.center) -| (af.center-|0,0);
                  draw [thick, black!80!white, fill=black!25!white] (ah.center) node [black, xshift=.28cm, yshift=-.4cm] {$bf A_3$} |- (ah.center|-0,0) -- (0,0) -- (ah.center) -| (ah.center-|0,0);
                  draw [thick, black!80!white, fill=black!20!white] (aw.center) node [black, xshift=.28cm, yshift=-.16cm] {$bf A_2$} |- (aw.center|-0,0) -- (0,0) -- (aw.center) -| (aw.center-|0,0);
                  draw [thick, black!80!white, fill=black!20!white] (ao.center) node [black, xshift=.8cm, yshift=0cm] {$bf A_1$} |- (ao.center|-0,0) -- (0,0) -- (ao.center) -| (ao.center-|0,0);
                  end{scope}
                  end{tikzpicture}
                  end{frame}
                  end{document}


                  enter image description here






                  share|improve this answer


























                    2












                    2








                    2







                    You need to place the clipping path into the scope, not before it, and close the clipping path with e.g. |- cycle or similar. Also you should need the same parameters as with the actual line. The looseness value was missing.



                    This solves points 1 and 2 of your list. I don't understand what you mean with point 3.



                    I also fixed your A_10 which needs to be written as A_{10}.



                    documentclass{beamer}
                    beamertemplatenavigationsymbolsempty
                    usepackage{verbatim}
                    usepackage{tikz}
                    usepackage{pgfplots}
                    usetikzlibrary{calc, backgrounds}
                    begin{document}
                    begin{frame}[t]
                    frametitle{}
                    begin{tikzpicture}[scale=.9, transform shape]
                    pgfmathsetmacro{incrmnty}{.86}
                    pgfmathsetmacro{incrmntx}{.86}

                    draw [thick](0,0) -- (incrmntx*10,0);
                    draw [thick](0,0) -- (0,incrmnty*10);

                    foreach y [evaluate=y as aff using int(y*10)] in {0,2,4,...,10}{
                    draw [black] (0,incrmnty*y) node [left, xshift=-.1cm] {aff} -- +(180:.12);
                    }

                    foreach x [evaluate=x as aff using int(x*10)] in {0,2,4,...,10}{
                    draw [black] (incrmnty*x,0) node [below, yshift=-.25cm] {aff} -- +(-90:incrmntx*.2);
                    }

                    draw [very thick, blue, looseness=.9] (0,0) to [out=15, in=-110]
                    node [pos=.0] (ao) {}
                    node [pos=.08] (aw){}
                    node [pos=.146] (ah) {}
                    node [pos=.24] (af) {}
                    node [pos=.306] (av) {}
                    node [pos=.4] (ax) {}
                    node [pos=.484] (as) {}
                    node [pos=.58] (ag) {}
                    node [pos=.704] (an) {}
                    node [pos=.8] (at) {}
                    node [pos=1.] (aa) {}
                    (incrmntx*10,incrmnty*10);

                    draw [very thick, red!70!black, looseness=1] (0,0) -- (incrmntx*10,incrmnty*10);
                    begin{scope}[on background layer]
                    path [clip, looseness=.9] (0,0) to [out=15, in=-110] (incrmntx*10,incrmnty*10) |- (0, -1) -- cycle;
                    draw [thick, black!80!white, fill=green!65!white] (aa.center) node [black, xshift=.36cm, yshift=-3.cm] {X} |- (aa.center|-0,0) -- (0,0) -- (aa.center);
                    draw [thick, black!80!white, fill=black!60!white] (at.center) node [black, xshift=.36cm, yshift=-3.cm] {$bf A_{10}$} |- (at.center|-0,0) -- (0,0) -- (at.center) -| (at.center-|0,0);
                    draw [thick, black!80!white, fill=black!55!white] (an.center) node [black, xshift=.28cm, yshift=-2.4cm] {$bf A_9$} |- (an.center|-0,0) -- (0,0) -- (an.center) -| (an.center-|0,0);
                    draw [thick, black!80!white, fill=black!50!white] (ag.center) node [black, xshift=.28cm, yshift=-2.cm] {$bf A_8$} |- (ag.center|-0,0) -- (0,0) -- (ag.center) -| (ag.center-|0,0);
                    draw [thick, black!80!white, fill=black!45!white] (as.center) node [black, xshift=.28cm, yshift=-1.46cm] {$bf A_7$} |- (as.center|-0,0) -- (0,0) -- (as.center) -| (as.center-|0,0);
                    draw [thick, black!80!white, fill=black!40!white] (ax.center) node [black, xshift=.28cm, yshift=-1.2cm] {$bf A_6$} |- (ax.center|-0,0)-- (0,0) -- (ax.center) -| (ax.center-|0,0);
                    draw [thick, black!80!white, fill=black!35!white] (av.center) node [black, xshift=.28cm, yshift=-.9cm] {$bf A_5$} |- (av.center|-0,0) -- (0,0) -- (av.center) -| (av.center-|0,0);
                    draw [thick, black!80!white, fill=black!30!white] (af.center) node [black, xshift=.28cm, yshift=-.68cm] {$bf A_4$} |- (af.center|-0,0)-- (0,0) -- (af.center) -| (af.center-|0,0);
                    draw [thick, black!80!white, fill=black!25!white] (ah.center) node [black, xshift=.28cm, yshift=-.4cm] {$bf A_3$} |- (ah.center|-0,0) -- (0,0) -- (ah.center) -| (ah.center-|0,0);
                    draw [thick, black!80!white, fill=black!20!white] (aw.center) node [black, xshift=.28cm, yshift=-.16cm] {$bf A_2$} |- (aw.center|-0,0) -- (0,0) -- (aw.center) -| (aw.center-|0,0);
                    draw [thick, black!80!white, fill=black!20!white] (ao.center) node [black, xshift=.8cm, yshift=0cm] {$bf A_1$} |- (ao.center|-0,0) -- (0,0) -- (ao.center) -| (ao.center-|0,0);
                    end{scope}
                    end{tikzpicture}
                    end{frame}
                    end{document}


                    enter image description here






                    share|improve this answer













                    You need to place the clipping path into the scope, not before it, and close the clipping path with e.g. |- cycle or similar. Also you should need the same parameters as with the actual line. The looseness value was missing.



                    This solves points 1 and 2 of your list. I don't understand what you mean with point 3.



                    I also fixed your A_10 which needs to be written as A_{10}.



                    documentclass{beamer}
                    beamertemplatenavigationsymbolsempty
                    usepackage{verbatim}
                    usepackage{tikz}
                    usepackage{pgfplots}
                    usetikzlibrary{calc, backgrounds}
                    begin{document}
                    begin{frame}[t]
                    frametitle{}
                    begin{tikzpicture}[scale=.9, transform shape]
                    pgfmathsetmacro{incrmnty}{.86}
                    pgfmathsetmacro{incrmntx}{.86}

                    draw [thick](0,0) -- (incrmntx*10,0);
                    draw [thick](0,0) -- (0,incrmnty*10);

                    foreach y [evaluate=y as aff using int(y*10)] in {0,2,4,...,10}{
                    draw [black] (0,incrmnty*y) node [left, xshift=-.1cm] {aff} -- +(180:.12);
                    }

                    foreach x [evaluate=x as aff using int(x*10)] in {0,2,4,...,10}{
                    draw [black] (incrmnty*x,0) node [below, yshift=-.25cm] {aff} -- +(-90:incrmntx*.2);
                    }

                    draw [very thick, blue, looseness=.9] (0,0) to [out=15, in=-110]
                    node [pos=.0] (ao) {}
                    node [pos=.08] (aw){}
                    node [pos=.146] (ah) {}
                    node [pos=.24] (af) {}
                    node [pos=.306] (av) {}
                    node [pos=.4] (ax) {}
                    node [pos=.484] (as) {}
                    node [pos=.58] (ag) {}
                    node [pos=.704] (an) {}
                    node [pos=.8] (at) {}
                    node [pos=1.] (aa) {}
                    (incrmntx*10,incrmnty*10);

                    draw [very thick, red!70!black, looseness=1] (0,0) -- (incrmntx*10,incrmnty*10);
                    begin{scope}[on background layer]
                    path [clip, looseness=.9] (0,0) to [out=15, in=-110] (incrmntx*10,incrmnty*10) |- (0, -1) -- cycle;
                    draw [thick, black!80!white, fill=green!65!white] (aa.center) node [black, xshift=.36cm, yshift=-3.cm] {X} |- (aa.center|-0,0) -- (0,0) -- (aa.center);
                    draw [thick, black!80!white, fill=black!60!white] (at.center) node [black, xshift=.36cm, yshift=-3.cm] {$bf A_{10}$} |- (at.center|-0,0) -- (0,0) -- (at.center) -| (at.center-|0,0);
                    draw [thick, black!80!white, fill=black!55!white] (an.center) node [black, xshift=.28cm, yshift=-2.4cm] {$bf A_9$} |- (an.center|-0,0) -- (0,0) -- (an.center) -| (an.center-|0,0);
                    draw [thick, black!80!white, fill=black!50!white] (ag.center) node [black, xshift=.28cm, yshift=-2.cm] {$bf A_8$} |- (ag.center|-0,0) -- (0,0) -- (ag.center) -| (ag.center-|0,0);
                    draw [thick, black!80!white, fill=black!45!white] (as.center) node [black, xshift=.28cm, yshift=-1.46cm] {$bf A_7$} |- (as.center|-0,0) -- (0,0) -- (as.center) -| (as.center-|0,0);
                    draw [thick, black!80!white, fill=black!40!white] (ax.center) node [black, xshift=.28cm, yshift=-1.2cm] {$bf A_6$} |- (ax.center|-0,0)-- (0,0) -- (ax.center) -| (ax.center-|0,0);
                    draw [thick, black!80!white, fill=black!35!white] (av.center) node [black, xshift=.28cm, yshift=-.9cm] {$bf A_5$} |- (av.center|-0,0) -- (0,0) -- (av.center) -| (av.center-|0,0);
                    draw [thick, black!80!white, fill=black!30!white] (af.center) node [black, xshift=.28cm, yshift=-.68cm] {$bf A_4$} |- (af.center|-0,0)-- (0,0) -- (af.center) -| (af.center-|0,0);
                    draw [thick, black!80!white, fill=black!25!white] (ah.center) node [black, xshift=.28cm, yshift=-.4cm] {$bf A_3$} |- (ah.center|-0,0) -- (0,0) -- (ah.center) -| (ah.center-|0,0);
                    draw [thick, black!80!white, fill=black!20!white] (aw.center) node [black, xshift=.28cm, yshift=-.16cm] {$bf A_2$} |- (aw.center|-0,0) -- (0,0) -- (aw.center) -| (aw.center-|0,0);
                    draw [thick, black!80!white, fill=black!20!white] (ao.center) node [black, xshift=.8cm, yshift=0cm] {$bf A_1$} |- (ao.center|-0,0) -- (0,0) -- (ao.center) -| (ao.center-|0,0);
                    end{scope}
                    end{tikzpicture}
                    end{frame}
                    end{document}


                    enter image description here







                    share|improve this answer












                    share|improve this answer



                    share|improve this answer










                    answered 43 mins ago









                    Martin ScharrerMartin Scharrer

                    201k45638819




                    201k45638819























                        1














                        Similar to Martin Scharrer's nice answer but with loops to make the code shorter. (And yes, the looseness was missing in the clip path.)



                        documentclass{beamer}
                        beamertemplatenavigationsymbolsempty
                        usepackage{verbatim}
                        usepackage{tikz}
                        usetikzlibrary{backgrounds}
                        begin{document}
                        begin{frame}[t]
                        frametitle{}
                        begin{tikzpicture}[scale=.9, transform shape]
                        pgfmathsetmacro{incrmnty}{.86}
                        pgfmathsetmacro{incrmntx}{.86}
                        draw [thick](0,0) -- (incrmntx*10,0);
                        draw [thick](0,0) -- (0,incrmnty*10);
                        foreach y [evaluate=y as aff using int(y*10)]in {0,2,4,...,10}
                        { draw [black] (0,incrmnty*y) node [left, xshift=-.1cm] {aff} -- +(180:.12);}
                        foreach x [evaluate=x as aff using int(x*10)]in {0,2,4,...,10}
                        { draw [black] (incrmnty*x,0) node [below, yshift=-.25cm] {aff} -- +(-90:incrmntx*.2);}
                        draw [very thick, blue] (0,0) to [out=15, in=-110, looseness=.9]
                        coordinate [pos=.0] (ao) coordinate [pos=.08] (aw) coordinate [pos=.146] (ah)
                        coordinate [pos=.24] (af) coordinate [pos=.306] (av) coordinate [pos=.4] (ax)
                        coordinate [pos=.484] (as) coordinate [pos=.58] (ag) coordinate [pos=.704] (an)
                        coordinate [pos=.8] (at) coordinate [pos=1.] (aa) (incrmntx*10,incrmnty*10);
                        draw [very thick, red!70!black, looseness=1] (0,0) -- (incrmntx*10,incrmnty*10);
                        begin{scope}[on background layer]
                        path[clip,postaction={draw,green,line width=1mm}] (0,0)
                        to [out=15, in=-110, looseness=.9] (incrmntx*10,incrmnty*10) |- cycle;
                        foreach X [count=Y,evaluate=Y as Z using {int(12-Y)}] in {aa,at,an,ag,as,ax,av,af,ah,aw,ao}
                        {pgfmathtruncatemacro{fullness}{70-5*Y}
                        draw [thick, black!80!white, fill=black!fullness!white]
                        (0,0) -- (X.center) |- cycle ;}
                        end{scope}
                        foreach X [count=Y,evaluate=Y as Z using {int(11-Y)}] in {at,an,ag,as,ax,av,af,ah,aw,ao}
                        draw [thick] (X.center|-0,0) |- (X.center-| (0,0)node[pos=0.25,right]{$boldsymbol{A_{Z}}$};
                        end{tikzpicture}
                        end{frame}
                        end{document}


                        enter image description here






                        share|improve this answer






























                          1














                          Similar to Martin Scharrer's nice answer but with loops to make the code shorter. (And yes, the looseness was missing in the clip path.)



                          documentclass{beamer}
                          beamertemplatenavigationsymbolsempty
                          usepackage{verbatim}
                          usepackage{tikz}
                          usetikzlibrary{backgrounds}
                          begin{document}
                          begin{frame}[t]
                          frametitle{}
                          begin{tikzpicture}[scale=.9, transform shape]
                          pgfmathsetmacro{incrmnty}{.86}
                          pgfmathsetmacro{incrmntx}{.86}
                          draw [thick](0,0) -- (incrmntx*10,0);
                          draw [thick](0,0) -- (0,incrmnty*10);
                          foreach y [evaluate=y as aff using int(y*10)]in {0,2,4,...,10}
                          { draw [black] (0,incrmnty*y) node [left, xshift=-.1cm] {aff} -- +(180:.12);}
                          foreach x [evaluate=x as aff using int(x*10)]in {0,2,4,...,10}
                          { draw [black] (incrmnty*x,0) node [below, yshift=-.25cm] {aff} -- +(-90:incrmntx*.2);}
                          draw [very thick, blue] (0,0) to [out=15, in=-110, looseness=.9]
                          coordinate [pos=.0] (ao) coordinate [pos=.08] (aw) coordinate [pos=.146] (ah)
                          coordinate [pos=.24] (af) coordinate [pos=.306] (av) coordinate [pos=.4] (ax)
                          coordinate [pos=.484] (as) coordinate [pos=.58] (ag) coordinate [pos=.704] (an)
                          coordinate [pos=.8] (at) coordinate [pos=1.] (aa) (incrmntx*10,incrmnty*10);
                          draw [very thick, red!70!black, looseness=1] (0,0) -- (incrmntx*10,incrmnty*10);
                          begin{scope}[on background layer]
                          path[clip,postaction={draw,green,line width=1mm}] (0,0)
                          to [out=15, in=-110, looseness=.9] (incrmntx*10,incrmnty*10) |- cycle;
                          foreach X [count=Y,evaluate=Y as Z using {int(12-Y)}] in {aa,at,an,ag,as,ax,av,af,ah,aw,ao}
                          {pgfmathtruncatemacro{fullness}{70-5*Y}
                          draw [thick, black!80!white, fill=black!fullness!white]
                          (0,0) -- (X.center) |- cycle ;}
                          end{scope}
                          foreach X [count=Y,evaluate=Y as Z using {int(11-Y)}] in {at,an,ag,as,ax,av,af,ah,aw,ao}
                          draw [thick] (X.center|-0,0) |- (X.center-| (0,0)node[pos=0.25,right]{$boldsymbol{A_{Z}}$};
                          end{tikzpicture}
                          end{frame}
                          end{document}


                          enter image description here






                          share|improve this answer




























                            1












                            1








                            1







                            Similar to Martin Scharrer's nice answer but with loops to make the code shorter. (And yes, the looseness was missing in the clip path.)



                            documentclass{beamer}
                            beamertemplatenavigationsymbolsempty
                            usepackage{verbatim}
                            usepackage{tikz}
                            usetikzlibrary{backgrounds}
                            begin{document}
                            begin{frame}[t]
                            frametitle{}
                            begin{tikzpicture}[scale=.9, transform shape]
                            pgfmathsetmacro{incrmnty}{.86}
                            pgfmathsetmacro{incrmntx}{.86}
                            draw [thick](0,0) -- (incrmntx*10,0);
                            draw [thick](0,0) -- (0,incrmnty*10);
                            foreach y [evaluate=y as aff using int(y*10)]in {0,2,4,...,10}
                            { draw [black] (0,incrmnty*y) node [left, xshift=-.1cm] {aff} -- +(180:.12);}
                            foreach x [evaluate=x as aff using int(x*10)]in {0,2,4,...,10}
                            { draw [black] (incrmnty*x,0) node [below, yshift=-.25cm] {aff} -- +(-90:incrmntx*.2);}
                            draw [very thick, blue] (0,0) to [out=15, in=-110, looseness=.9]
                            coordinate [pos=.0] (ao) coordinate [pos=.08] (aw) coordinate [pos=.146] (ah)
                            coordinate [pos=.24] (af) coordinate [pos=.306] (av) coordinate [pos=.4] (ax)
                            coordinate [pos=.484] (as) coordinate [pos=.58] (ag) coordinate [pos=.704] (an)
                            coordinate [pos=.8] (at) coordinate [pos=1.] (aa) (incrmntx*10,incrmnty*10);
                            draw [very thick, red!70!black, looseness=1] (0,0) -- (incrmntx*10,incrmnty*10);
                            begin{scope}[on background layer]
                            path[clip,postaction={draw,green,line width=1mm}] (0,0)
                            to [out=15, in=-110, looseness=.9] (incrmntx*10,incrmnty*10) |- cycle;
                            foreach X [count=Y,evaluate=Y as Z using {int(12-Y)}] in {aa,at,an,ag,as,ax,av,af,ah,aw,ao}
                            {pgfmathtruncatemacro{fullness}{70-5*Y}
                            draw [thick, black!80!white, fill=black!fullness!white]
                            (0,0) -- (X.center) |- cycle ;}
                            end{scope}
                            foreach X [count=Y,evaluate=Y as Z using {int(11-Y)}] in {at,an,ag,as,ax,av,af,ah,aw,ao}
                            draw [thick] (X.center|-0,0) |- (X.center-| (0,0)node[pos=0.25,right]{$boldsymbol{A_{Z}}$};
                            end{tikzpicture}
                            end{frame}
                            end{document}


                            enter image description here






                            share|improve this answer















                            Similar to Martin Scharrer's nice answer but with loops to make the code shorter. (And yes, the looseness was missing in the clip path.)



                            documentclass{beamer}
                            beamertemplatenavigationsymbolsempty
                            usepackage{verbatim}
                            usepackage{tikz}
                            usetikzlibrary{backgrounds}
                            begin{document}
                            begin{frame}[t]
                            frametitle{}
                            begin{tikzpicture}[scale=.9, transform shape]
                            pgfmathsetmacro{incrmnty}{.86}
                            pgfmathsetmacro{incrmntx}{.86}
                            draw [thick](0,0) -- (incrmntx*10,0);
                            draw [thick](0,0) -- (0,incrmnty*10);
                            foreach y [evaluate=y as aff using int(y*10)]in {0,2,4,...,10}
                            { draw [black] (0,incrmnty*y) node [left, xshift=-.1cm] {aff} -- +(180:.12);}
                            foreach x [evaluate=x as aff using int(x*10)]in {0,2,4,...,10}
                            { draw [black] (incrmnty*x,0) node [below, yshift=-.25cm] {aff} -- +(-90:incrmntx*.2);}
                            draw [very thick, blue] (0,0) to [out=15, in=-110, looseness=.9]
                            coordinate [pos=.0] (ao) coordinate [pos=.08] (aw) coordinate [pos=.146] (ah)
                            coordinate [pos=.24] (af) coordinate [pos=.306] (av) coordinate [pos=.4] (ax)
                            coordinate [pos=.484] (as) coordinate [pos=.58] (ag) coordinate [pos=.704] (an)
                            coordinate [pos=.8] (at) coordinate [pos=1.] (aa) (incrmntx*10,incrmnty*10);
                            draw [very thick, red!70!black, looseness=1] (0,0) -- (incrmntx*10,incrmnty*10);
                            begin{scope}[on background layer]
                            path[clip,postaction={draw,green,line width=1mm}] (0,0)
                            to [out=15, in=-110, looseness=.9] (incrmntx*10,incrmnty*10) |- cycle;
                            foreach X [count=Y,evaluate=Y as Z using {int(12-Y)}] in {aa,at,an,ag,as,ax,av,af,ah,aw,ao}
                            {pgfmathtruncatemacro{fullness}{70-5*Y}
                            draw [thick, black!80!white, fill=black!fullness!white]
                            (0,0) -- (X.center) |- cycle ;}
                            end{scope}
                            foreach X [count=Y,evaluate=Y as Z using {int(11-Y)}] in {at,an,ag,as,ax,av,af,ah,aw,ao}
                            draw [thick] (X.center|-0,0) |- (X.center-| (0,0)node[pos=0.25,right]{$boldsymbol{A_{Z}}$};
                            end{tikzpicture}
                            end{frame}
                            end{document}


                            enter image description here







                            share|improve this answer














                            share|improve this answer



                            share|improve this answer








                            edited 36 mins ago

























                            answered 41 mins ago









                            marmotmarmot

                            97.9k4113217




                            97.9k4113217























                                0














                                I have to go to work, I will come back this afternoon to explain the code if you need it. Sorry.



                                documentclass{beamer}
                                beamertemplatenavigationsymbolsempty
                                usepackage{verbatim}
                                usepackage{tikz}
                                usepackage{pgfplots}
                                usetikzlibrary{calc, backgrounds}
                                begin{document}
                                begin{frame}[t]
                                frametitle{}
                                begin{tikzpicture}[scale=.9, transform shape]
                                pgfmathsetmacro{incrmnty}{.86}
                                pgfmathsetmacro{incrmntx}{.86}
                                draw [thick](0,0) -- (incrmntx*10,0);
                                draw [thick](0,0) -- (0,incrmnty*10);
                                foreach y [evaluate=y as aff using int(y*10)]in {0,2,4,...,10}{ draw [black] (0,incrmnty*y) node [left, xshift=-.1cm] {aff} -- +(180:.12);}
                                foreach x [evaluate=x as aff using int(x*10)]in {0,2,4,...,10}{
                                draw [black] (incrmnty*x,0) node [below, yshift=-.25cm] {aff} -- +(-90:incrmntx*.2);
                                }
                                draw [very thick, blue, looseness=.9] (0,0) to [out=15, in=-110] node [pos=.0] (ao) {} node [pos=.08] (aw){} node [pos=.146] (ah) {} node [pos=.24] (af) {} node [pos=.306] (av) {} node [pos=.4] (ax) {} node [pos=.484] (as) {} node [pos=.58] (ag) {} node [pos=.704] (an) {} node [pos=.8] (at) {at} node [pos=1.] (aa) {} (incrmntx*10,incrmnty*10);
                                draw [very thick, red!70!black, looseness=1] (0,0) -- (incrmntx*10,incrmnty*10);
                                path[clip] (0,0) to [out=15, in=-110] (incrmntx*10,incrmnty*10);
                                begin{scope}[on background layer]
                                draw [thick, black!80!white, fill=black!65!white] (aa.center |- 0,0)--(aa.center) --(at.center) |- (at.center |- 0,0) -- cycle;
                                draw [thick, black!80!white, fill=black!60!white] (at.center) node [black, xshift=.36cm, yshift=-3.cm] {$bf A_10$} --(an.center) |-(at.center |- 0,0) --cycle;
                                draw [thick, black!80!white, fill=black!55!white] (an.center) node [black, xshift=.28cm, yshift=-2.4cm] {$bf A_9$} -- (ag.center)|- (an.center|- 0,0) -- cycle;
                                draw [thick, black!80!white, fill=black!50!white] (ag.center) node [black, xshift=.28cm, yshift=-2.cm] {$bf A_8$} --(as.center) |- (ag.center|-0,0) -- cycle;
                                draw [thick, black!80!white, fill=black!45!white] (as.center) node [black, xshift=.28cm, yshift=-1.46cm] {$bf A_7$} --(ax.center)|- (as.center|-0,0) -- cycle;
                                draw [thick, black!80!white, fill=black!40!white] (ax.center) node [black, xshift=.28cm, yshift=-1.2cm] {$bf A_6$} -- (av.center)|- (ax.center|-0,0)-- cycle;
                                draw [thick, black!80!white, fill=black!35!white] (av.center) node [black, xshift=.28cm, yshift=-.9cm] {$bf A_5$} --(af.center)|- (av.center|-0,0) -- cycle;
                                draw [thick, black!80!white, fill=black!30!white] (af.center) node [black, xshift=.28cm, yshift=-.68cm] {$bf A_4$} --(ah.center)|- (af.center|-0,0)-- cycle;
                                draw [thick, black!80!white, fill=black!25!white] (ah.center) node [black, xshift=.28cm, yshift=-.4cm] {$bf A_3$} --(aw.center)|- (ah.center|-0,0) -- cycle;
                                draw [thick, black!80!white, fill=black!20!white] (aw.center) node [black, xshift=.28cm, yshift=-.16cm] {$bf A_2$} --(ao.center)|- (aw.center|-0,0) -- cycle;
                                %draw [thick, black!80!white, fill=black!20!white] (ao.center) node [black, xshift=.8cm, yshift=0cm] {$bf A_1$} |- (ao.center|-0,0) -- (0,0) -- (ao.center) -| (ao.center-|0,0);
                                end{scope}
                                end{tikzpicture}
                                end{frame}
                                end{document}


                                screenshot






                                share|improve this answer




























                                  0














                                  I have to go to work, I will come back this afternoon to explain the code if you need it. Sorry.



                                  documentclass{beamer}
                                  beamertemplatenavigationsymbolsempty
                                  usepackage{verbatim}
                                  usepackage{tikz}
                                  usepackage{pgfplots}
                                  usetikzlibrary{calc, backgrounds}
                                  begin{document}
                                  begin{frame}[t]
                                  frametitle{}
                                  begin{tikzpicture}[scale=.9, transform shape]
                                  pgfmathsetmacro{incrmnty}{.86}
                                  pgfmathsetmacro{incrmntx}{.86}
                                  draw [thick](0,0) -- (incrmntx*10,0);
                                  draw [thick](0,0) -- (0,incrmnty*10);
                                  foreach y [evaluate=y as aff using int(y*10)]in {0,2,4,...,10}{ draw [black] (0,incrmnty*y) node [left, xshift=-.1cm] {aff} -- +(180:.12);}
                                  foreach x [evaluate=x as aff using int(x*10)]in {0,2,4,...,10}{
                                  draw [black] (incrmnty*x,0) node [below, yshift=-.25cm] {aff} -- +(-90:incrmntx*.2);
                                  }
                                  draw [very thick, blue, looseness=.9] (0,0) to [out=15, in=-110] node [pos=.0] (ao) {} node [pos=.08] (aw){} node [pos=.146] (ah) {} node [pos=.24] (af) {} node [pos=.306] (av) {} node [pos=.4] (ax) {} node [pos=.484] (as) {} node [pos=.58] (ag) {} node [pos=.704] (an) {} node [pos=.8] (at) {at} node [pos=1.] (aa) {} (incrmntx*10,incrmnty*10);
                                  draw [very thick, red!70!black, looseness=1] (0,0) -- (incrmntx*10,incrmnty*10);
                                  path[clip] (0,0) to [out=15, in=-110] (incrmntx*10,incrmnty*10);
                                  begin{scope}[on background layer]
                                  draw [thick, black!80!white, fill=black!65!white] (aa.center |- 0,0)--(aa.center) --(at.center) |- (at.center |- 0,0) -- cycle;
                                  draw [thick, black!80!white, fill=black!60!white] (at.center) node [black, xshift=.36cm, yshift=-3.cm] {$bf A_10$} --(an.center) |-(at.center |- 0,0) --cycle;
                                  draw [thick, black!80!white, fill=black!55!white] (an.center) node [black, xshift=.28cm, yshift=-2.4cm] {$bf A_9$} -- (ag.center)|- (an.center|- 0,0) -- cycle;
                                  draw [thick, black!80!white, fill=black!50!white] (ag.center) node [black, xshift=.28cm, yshift=-2.cm] {$bf A_8$} --(as.center) |- (ag.center|-0,0) -- cycle;
                                  draw [thick, black!80!white, fill=black!45!white] (as.center) node [black, xshift=.28cm, yshift=-1.46cm] {$bf A_7$} --(ax.center)|- (as.center|-0,0) -- cycle;
                                  draw [thick, black!80!white, fill=black!40!white] (ax.center) node [black, xshift=.28cm, yshift=-1.2cm] {$bf A_6$} -- (av.center)|- (ax.center|-0,0)-- cycle;
                                  draw [thick, black!80!white, fill=black!35!white] (av.center) node [black, xshift=.28cm, yshift=-.9cm] {$bf A_5$} --(af.center)|- (av.center|-0,0) -- cycle;
                                  draw [thick, black!80!white, fill=black!30!white] (af.center) node [black, xshift=.28cm, yshift=-.68cm] {$bf A_4$} --(ah.center)|- (af.center|-0,0)-- cycle;
                                  draw [thick, black!80!white, fill=black!25!white] (ah.center) node [black, xshift=.28cm, yshift=-.4cm] {$bf A_3$} --(aw.center)|- (ah.center|-0,0) -- cycle;
                                  draw [thick, black!80!white, fill=black!20!white] (aw.center) node [black, xshift=.28cm, yshift=-.16cm] {$bf A_2$} --(ao.center)|- (aw.center|-0,0) -- cycle;
                                  %draw [thick, black!80!white, fill=black!20!white] (ao.center) node [black, xshift=.8cm, yshift=0cm] {$bf A_1$} |- (ao.center|-0,0) -- (0,0) -- (ao.center) -| (ao.center-|0,0);
                                  end{scope}
                                  end{tikzpicture}
                                  end{frame}
                                  end{document}


                                  screenshot






                                  share|improve this answer


























                                    0












                                    0








                                    0







                                    I have to go to work, I will come back this afternoon to explain the code if you need it. Sorry.



                                    documentclass{beamer}
                                    beamertemplatenavigationsymbolsempty
                                    usepackage{verbatim}
                                    usepackage{tikz}
                                    usepackage{pgfplots}
                                    usetikzlibrary{calc, backgrounds}
                                    begin{document}
                                    begin{frame}[t]
                                    frametitle{}
                                    begin{tikzpicture}[scale=.9, transform shape]
                                    pgfmathsetmacro{incrmnty}{.86}
                                    pgfmathsetmacro{incrmntx}{.86}
                                    draw [thick](0,0) -- (incrmntx*10,0);
                                    draw [thick](0,0) -- (0,incrmnty*10);
                                    foreach y [evaluate=y as aff using int(y*10)]in {0,2,4,...,10}{ draw [black] (0,incrmnty*y) node [left, xshift=-.1cm] {aff} -- +(180:.12);}
                                    foreach x [evaluate=x as aff using int(x*10)]in {0,2,4,...,10}{
                                    draw [black] (incrmnty*x,0) node [below, yshift=-.25cm] {aff} -- +(-90:incrmntx*.2);
                                    }
                                    draw [very thick, blue, looseness=.9] (0,0) to [out=15, in=-110] node [pos=.0] (ao) {} node [pos=.08] (aw){} node [pos=.146] (ah) {} node [pos=.24] (af) {} node [pos=.306] (av) {} node [pos=.4] (ax) {} node [pos=.484] (as) {} node [pos=.58] (ag) {} node [pos=.704] (an) {} node [pos=.8] (at) {at} node [pos=1.] (aa) {} (incrmntx*10,incrmnty*10);
                                    draw [very thick, red!70!black, looseness=1] (0,0) -- (incrmntx*10,incrmnty*10);
                                    path[clip] (0,0) to [out=15, in=-110] (incrmntx*10,incrmnty*10);
                                    begin{scope}[on background layer]
                                    draw [thick, black!80!white, fill=black!65!white] (aa.center |- 0,0)--(aa.center) --(at.center) |- (at.center |- 0,0) -- cycle;
                                    draw [thick, black!80!white, fill=black!60!white] (at.center) node [black, xshift=.36cm, yshift=-3.cm] {$bf A_10$} --(an.center) |-(at.center |- 0,0) --cycle;
                                    draw [thick, black!80!white, fill=black!55!white] (an.center) node [black, xshift=.28cm, yshift=-2.4cm] {$bf A_9$} -- (ag.center)|- (an.center|- 0,0) -- cycle;
                                    draw [thick, black!80!white, fill=black!50!white] (ag.center) node [black, xshift=.28cm, yshift=-2.cm] {$bf A_8$} --(as.center) |- (ag.center|-0,0) -- cycle;
                                    draw [thick, black!80!white, fill=black!45!white] (as.center) node [black, xshift=.28cm, yshift=-1.46cm] {$bf A_7$} --(ax.center)|- (as.center|-0,0) -- cycle;
                                    draw [thick, black!80!white, fill=black!40!white] (ax.center) node [black, xshift=.28cm, yshift=-1.2cm] {$bf A_6$} -- (av.center)|- (ax.center|-0,0)-- cycle;
                                    draw [thick, black!80!white, fill=black!35!white] (av.center) node [black, xshift=.28cm, yshift=-.9cm] {$bf A_5$} --(af.center)|- (av.center|-0,0) -- cycle;
                                    draw [thick, black!80!white, fill=black!30!white] (af.center) node [black, xshift=.28cm, yshift=-.68cm] {$bf A_4$} --(ah.center)|- (af.center|-0,0)-- cycle;
                                    draw [thick, black!80!white, fill=black!25!white] (ah.center) node [black, xshift=.28cm, yshift=-.4cm] {$bf A_3$} --(aw.center)|- (ah.center|-0,0) -- cycle;
                                    draw [thick, black!80!white, fill=black!20!white] (aw.center) node [black, xshift=.28cm, yshift=-.16cm] {$bf A_2$} --(ao.center)|- (aw.center|-0,0) -- cycle;
                                    %draw [thick, black!80!white, fill=black!20!white] (ao.center) node [black, xshift=.8cm, yshift=0cm] {$bf A_1$} |- (ao.center|-0,0) -- (0,0) -- (ao.center) -| (ao.center-|0,0);
                                    end{scope}
                                    end{tikzpicture}
                                    end{frame}
                                    end{document}


                                    screenshot






                                    share|improve this answer













                                    I have to go to work, I will come back this afternoon to explain the code if you need it. Sorry.



                                    documentclass{beamer}
                                    beamertemplatenavigationsymbolsempty
                                    usepackage{verbatim}
                                    usepackage{tikz}
                                    usepackage{pgfplots}
                                    usetikzlibrary{calc, backgrounds}
                                    begin{document}
                                    begin{frame}[t]
                                    frametitle{}
                                    begin{tikzpicture}[scale=.9, transform shape]
                                    pgfmathsetmacro{incrmnty}{.86}
                                    pgfmathsetmacro{incrmntx}{.86}
                                    draw [thick](0,0) -- (incrmntx*10,0);
                                    draw [thick](0,0) -- (0,incrmnty*10);
                                    foreach y [evaluate=y as aff using int(y*10)]in {0,2,4,...,10}{ draw [black] (0,incrmnty*y) node [left, xshift=-.1cm] {aff} -- +(180:.12);}
                                    foreach x [evaluate=x as aff using int(x*10)]in {0,2,4,...,10}{
                                    draw [black] (incrmnty*x,0) node [below, yshift=-.25cm] {aff} -- +(-90:incrmntx*.2);
                                    }
                                    draw [very thick, blue, looseness=.9] (0,0) to [out=15, in=-110] node [pos=.0] (ao) {} node [pos=.08] (aw){} node [pos=.146] (ah) {} node [pos=.24] (af) {} node [pos=.306] (av) {} node [pos=.4] (ax) {} node [pos=.484] (as) {} node [pos=.58] (ag) {} node [pos=.704] (an) {} node [pos=.8] (at) {at} node [pos=1.] (aa) {} (incrmntx*10,incrmnty*10);
                                    draw [very thick, red!70!black, looseness=1] (0,0) -- (incrmntx*10,incrmnty*10);
                                    path[clip] (0,0) to [out=15, in=-110] (incrmntx*10,incrmnty*10);
                                    begin{scope}[on background layer]
                                    draw [thick, black!80!white, fill=black!65!white] (aa.center |- 0,0)--(aa.center) --(at.center) |- (at.center |- 0,0) -- cycle;
                                    draw [thick, black!80!white, fill=black!60!white] (at.center) node [black, xshift=.36cm, yshift=-3.cm] {$bf A_10$} --(an.center) |-(at.center |- 0,0) --cycle;
                                    draw [thick, black!80!white, fill=black!55!white] (an.center) node [black, xshift=.28cm, yshift=-2.4cm] {$bf A_9$} -- (ag.center)|- (an.center|- 0,0) -- cycle;
                                    draw [thick, black!80!white, fill=black!50!white] (ag.center) node [black, xshift=.28cm, yshift=-2.cm] {$bf A_8$} --(as.center) |- (ag.center|-0,0) -- cycle;
                                    draw [thick, black!80!white, fill=black!45!white] (as.center) node [black, xshift=.28cm, yshift=-1.46cm] {$bf A_7$} --(ax.center)|- (as.center|-0,0) -- cycle;
                                    draw [thick, black!80!white, fill=black!40!white] (ax.center) node [black, xshift=.28cm, yshift=-1.2cm] {$bf A_6$} -- (av.center)|- (ax.center|-0,0)-- cycle;
                                    draw [thick, black!80!white, fill=black!35!white] (av.center) node [black, xshift=.28cm, yshift=-.9cm] {$bf A_5$} --(af.center)|- (av.center|-0,0) -- cycle;
                                    draw [thick, black!80!white, fill=black!30!white] (af.center) node [black, xshift=.28cm, yshift=-.68cm] {$bf A_4$} --(ah.center)|- (af.center|-0,0)-- cycle;
                                    draw [thick, black!80!white, fill=black!25!white] (ah.center) node [black, xshift=.28cm, yshift=-.4cm] {$bf A_3$} --(aw.center)|- (ah.center|-0,0) -- cycle;
                                    draw [thick, black!80!white, fill=black!20!white] (aw.center) node [black, xshift=.28cm, yshift=-.16cm] {$bf A_2$} --(ao.center)|- (aw.center|-0,0) -- cycle;
                                    %draw [thick, black!80!white, fill=black!20!white] (ao.center) node [black, xshift=.8cm, yshift=0cm] {$bf A_1$} |- (ao.center|-0,0) -- (0,0) -- (ao.center) -| (ao.center-|0,0);
                                    end{scope}
                                    end{tikzpicture}
                                    end{frame}
                                    end{document}


                                    screenshot







                                    share|improve this answer












                                    share|improve this answer



                                    share|improve this answer










                                    answered 44 mins ago









                                    AndréCAndréC

                                    8,82911447




                                    8,82911447






























                                        draft saved

                                        draft discarded




















































                                        Thanks for contributing an answer to TeX - LaTeX Stack Exchange!


                                        • Please be sure to answer the question. Provide details and share your research!

                                        But avoid



                                        • Asking for help, clarification, or responding to other answers.

                                        • Making statements based on opinion; back them up with references or personal experience.


                                        To learn more, see our tips on writing great answers.




                                        draft saved


                                        draft discarded














                                        StackExchange.ready(
                                        function () {
                                        StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2ftex.stackexchange.com%2fquestions%2f473712%2fclipping-shaded-areas-to-a-curve-boundary%23new-answer', 'question_page');
                                        }
                                        );

                                        Post as a guest















                                        Required, but never shown





















































                                        Required, but never shown














                                        Required, but never shown












                                        Required, but never shown







                                        Required, but never shown

































                                        Required, but never shown














                                        Required, but never shown












                                        Required, but never shown







                                        Required, but never shown







                                        Popular posts from this blog

                                        Liste der Baudenkmale in Friedland (Mecklenburg)

                                        Single-Malt-Whisky

                                        Czorneboh