Why one of virtual NICs called bond0?





.everyoneloves__top-leaderboard:empty,.everyoneloves__mid-leaderboard:empty,.everyoneloves__bot-mid-leaderboard:empty{ height:90px;width:728px;box-sizing:border-box;
}







1















I just took over a very old network cluster(no documents and manual left) so I have to imagine the meaning of configuration by myself. Some of the servers' IP configure as following(when I issue ifconfig)



bond0: flags=5187<UP,BROADCAST,RUNNING,MASTER,MULTICAST>
inet 10.1.237.11 netmask 255.255.255.192 broadcast 10.1.237.63
ether 6c:90:af:68:5a:28 txqueuelen 0 (Ethernet)

bond0.901: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>
inet 147.146.67.13 netmask 255.255.255.240 broadcast 147.146.67.15
ether 6c:90:af:68:5a:28 txqueuelen 0 (Ethernet)

bond0.901:1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>
inet 147.185.211.5 netmask 255.255.255.0 broadcast 147.185.211.255
ether 6c:90:af:68:5a:28 txqueuelen 0 (Ethernet)

eth2: flags=6211<UP,BROADCAST,RUNNING,SLAVE,MULTICAST>
ether 6c:90:af:68:5a:28 txqueuelen 1000 (Ethernet)

eth3: flags=6211<UP,BROADCAST,RUNNING,SLAVE,MULTICAST>
ether 6c:90:af:68:5a:28 txqueuelen 1000 (Ethernet)

lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
loop txqueuelen 0 (Local Loopback)


From the same mac address, I can see there is only one NIC. I was told that bond0 for inner IP, bond0.901 for internet IP, bond0.901:1 for Anycast IP. So my question is that what do eth2 and eth3 for and why one of the virtual NIC called bond0, is there anything need to be bond together?



When I issued the command: lspci|grep Ether, I got the following:



01:00.0 Ethernet controller: Intel Corporation I350 Gigabit Network Connection (rev 01)
01:00.1 Ethernet controller: Intel Corporation I350 Gigabit Network Connection (rev 01)
01:00.2 Ethernet controller: Intel Corporation I350 Gigabit Network Connection (rev 01)
01:00.3 Ethernet controller: Intel Corporation I350 Gigabit Network Connection (rev 01)
04:00.0 Ethernet controller: Intel Corporation 82599ES 10-Gigabit SFI/SFP+ Network Connection (rev 01)
04:00.1 Ethernet controller: Intel Corporation 82599ES 10-Gigabit SFI/SFP+ Network Connection (rev 01)
07:00.0 Ethernet controller: Intel Corporation 82599ES 10-Gigabit SFI/SFP+ Network Connection (rev 01)
07:00.1 Ethernet controller: Intel Corporation 82599ES 10-Gigabit SFI/SFP+ Network Connection (rev 01)
09:00.0 Ethernet controller: Intel Corporation 82599ES 10-Gigabit SFI/SFP+ Network Connection (rev 01)
09:00.1 Ethernet controller: Intel Corporation 82599ES 10-Gigabit SFI/SFP+ Network Connection (rev 01)


Does the above mean I have 10 physical Network cards please?










share|improve this question









New contributor




Jack is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.





















  • What does the output of ifenslave -a and ip link show and ip addr show look like?

    – Zoredache
    4 hours ago






  • 1





    Does the above mean I have 10 physical Network cards please - Sure looks like it. Not sure which one of your interfaces are actually being used though.

    – Zoredache
    2 hours ago


















1















I just took over a very old network cluster(no documents and manual left) so I have to imagine the meaning of configuration by myself. Some of the servers' IP configure as following(when I issue ifconfig)



bond0: flags=5187<UP,BROADCAST,RUNNING,MASTER,MULTICAST>
inet 10.1.237.11 netmask 255.255.255.192 broadcast 10.1.237.63
ether 6c:90:af:68:5a:28 txqueuelen 0 (Ethernet)

bond0.901: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>
inet 147.146.67.13 netmask 255.255.255.240 broadcast 147.146.67.15
ether 6c:90:af:68:5a:28 txqueuelen 0 (Ethernet)

bond0.901:1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>
inet 147.185.211.5 netmask 255.255.255.0 broadcast 147.185.211.255
ether 6c:90:af:68:5a:28 txqueuelen 0 (Ethernet)

eth2: flags=6211<UP,BROADCAST,RUNNING,SLAVE,MULTICAST>
ether 6c:90:af:68:5a:28 txqueuelen 1000 (Ethernet)

eth3: flags=6211<UP,BROADCAST,RUNNING,SLAVE,MULTICAST>
ether 6c:90:af:68:5a:28 txqueuelen 1000 (Ethernet)

lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
loop txqueuelen 0 (Local Loopback)


From the same mac address, I can see there is only one NIC. I was told that bond0 for inner IP, bond0.901 for internet IP, bond0.901:1 for Anycast IP. So my question is that what do eth2 and eth3 for and why one of the virtual NIC called bond0, is there anything need to be bond together?



When I issued the command: lspci|grep Ether, I got the following:



01:00.0 Ethernet controller: Intel Corporation I350 Gigabit Network Connection (rev 01)
01:00.1 Ethernet controller: Intel Corporation I350 Gigabit Network Connection (rev 01)
01:00.2 Ethernet controller: Intel Corporation I350 Gigabit Network Connection (rev 01)
01:00.3 Ethernet controller: Intel Corporation I350 Gigabit Network Connection (rev 01)
04:00.0 Ethernet controller: Intel Corporation 82599ES 10-Gigabit SFI/SFP+ Network Connection (rev 01)
04:00.1 Ethernet controller: Intel Corporation 82599ES 10-Gigabit SFI/SFP+ Network Connection (rev 01)
07:00.0 Ethernet controller: Intel Corporation 82599ES 10-Gigabit SFI/SFP+ Network Connection (rev 01)
07:00.1 Ethernet controller: Intel Corporation 82599ES 10-Gigabit SFI/SFP+ Network Connection (rev 01)
09:00.0 Ethernet controller: Intel Corporation 82599ES 10-Gigabit SFI/SFP+ Network Connection (rev 01)
09:00.1 Ethernet controller: Intel Corporation 82599ES 10-Gigabit SFI/SFP+ Network Connection (rev 01)


Does the above mean I have 10 physical Network cards please?










share|improve this question









New contributor




Jack is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.





















  • What does the output of ifenslave -a and ip link show and ip addr show look like?

    – Zoredache
    4 hours ago






  • 1





    Does the above mean I have 10 physical Network cards please - Sure looks like it. Not sure which one of your interfaces are actually being used though.

    – Zoredache
    2 hours ago














1












1








1








I just took over a very old network cluster(no documents and manual left) so I have to imagine the meaning of configuration by myself. Some of the servers' IP configure as following(when I issue ifconfig)



bond0: flags=5187<UP,BROADCAST,RUNNING,MASTER,MULTICAST>
inet 10.1.237.11 netmask 255.255.255.192 broadcast 10.1.237.63
ether 6c:90:af:68:5a:28 txqueuelen 0 (Ethernet)

bond0.901: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>
inet 147.146.67.13 netmask 255.255.255.240 broadcast 147.146.67.15
ether 6c:90:af:68:5a:28 txqueuelen 0 (Ethernet)

bond0.901:1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>
inet 147.185.211.5 netmask 255.255.255.0 broadcast 147.185.211.255
ether 6c:90:af:68:5a:28 txqueuelen 0 (Ethernet)

eth2: flags=6211<UP,BROADCAST,RUNNING,SLAVE,MULTICAST>
ether 6c:90:af:68:5a:28 txqueuelen 1000 (Ethernet)

eth3: flags=6211<UP,BROADCAST,RUNNING,SLAVE,MULTICAST>
ether 6c:90:af:68:5a:28 txqueuelen 1000 (Ethernet)

lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
loop txqueuelen 0 (Local Loopback)


From the same mac address, I can see there is only one NIC. I was told that bond0 for inner IP, bond0.901 for internet IP, bond0.901:1 for Anycast IP. So my question is that what do eth2 and eth3 for and why one of the virtual NIC called bond0, is there anything need to be bond together?



When I issued the command: lspci|grep Ether, I got the following:



01:00.0 Ethernet controller: Intel Corporation I350 Gigabit Network Connection (rev 01)
01:00.1 Ethernet controller: Intel Corporation I350 Gigabit Network Connection (rev 01)
01:00.2 Ethernet controller: Intel Corporation I350 Gigabit Network Connection (rev 01)
01:00.3 Ethernet controller: Intel Corporation I350 Gigabit Network Connection (rev 01)
04:00.0 Ethernet controller: Intel Corporation 82599ES 10-Gigabit SFI/SFP+ Network Connection (rev 01)
04:00.1 Ethernet controller: Intel Corporation 82599ES 10-Gigabit SFI/SFP+ Network Connection (rev 01)
07:00.0 Ethernet controller: Intel Corporation 82599ES 10-Gigabit SFI/SFP+ Network Connection (rev 01)
07:00.1 Ethernet controller: Intel Corporation 82599ES 10-Gigabit SFI/SFP+ Network Connection (rev 01)
09:00.0 Ethernet controller: Intel Corporation 82599ES 10-Gigabit SFI/SFP+ Network Connection (rev 01)
09:00.1 Ethernet controller: Intel Corporation 82599ES 10-Gigabit SFI/SFP+ Network Connection (rev 01)


Does the above mean I have 10 physical Network cards please?










share|improve this question









New contributor




Jack is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.












I just took over a very old network cluster(no documents and manual left) so I have to imagine the meaning of configuration by myself. Some of the servers' IP configure as following(when I issue ifconfig)



bond0: flags=5187<UP,BROADCAST,RUNNING,MASTER,MULTICAST>
inet 10.1.237.11 netmask 255.255.255.192 broadcast 10.1.237.63
ether 6c:90:af:68:5a:28 txqueuelen 0 (Ethernet)

bond0.901: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>
inet 147.146.67.13 netmask 255.255.255.240 broadcast 147.146.67.15
ether 6c:90:af:68:5a:28 txqueuelen 0 (Ethernet)

bond0.901:1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>
inet 147.185.211.5 netmask 255.255.255.0 broadcast 147.185.211.255
ether 6c:90:af:68:5a:28 txqueuelen 0 (Ethernet)

eth2: flags=6211<UP,BROADCAST,RUNNING,SLAVE,MULTICAST>
ether 6c:90:af:68:5a:28 txqueuelen 1000 (Ethernet)

eth3: flags=6211<UP,BROADCAST,RUNNING,SLAVE,MULTICAST>
ether 6c:90:af:68:5a:28 txqueuelen 1000 (Ethernet)

lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
loop txqueuelen 0 (Local Loopback)


From the same mac address, I can see there is only one NIC. I was told that bond0 for inner IP, bond0.901 for internet IP, bond0.901:1 for Anycast IP. So my question is that what do eth2 and eth3 for and why one of the virtual NIC called bond0, is there anything need to be bond together?



When I issued the command: lspci|grep Ether, I got the following:



01:00.0 Ethernet controller: Intel Corporation I350 Gigabit Network Connection (rev 01)
01:00.1 Ethernet controller: Intel Corporation I350 Gigabit Network Connection (rev 01)
01:00.2 Ethernet controller: Intel Corporation I350 Gigabit Network Connection (rev 01)
01:00.3 Ethernet controller: Intel Corporation I350 Gigabit Network Connection (rev 01)
04:00.0 Ethernet controller: Intel Corporation 82599ES 10-Gigabit SFI/SFP+ Network Connection (rev 01)
04:00.1 Ethernet controller: Intel Corporation 82599ES 10-Gigabit SFI/SFP+ Network Connection (rev 01)
07:00.0 Ethernet controller: Intel Corporation 82599ES 10-Gigabit SFI/SFP+ Network Connection (rev 01)
07:00.1 Ethernet controller: Intel Corporation 82599ES 10-Gigabit SFI/SFP+ Network Connection (rev 01)
09:00.0 Ethernet controller: Intel Corporation 82599ES 10-Gigabit SFI/SFP+ Network Connection (rev 01)
09:00.1 Ethernet controller: Intel Corporation 82599ES 10-Gigabit SFI/SFP+ Network Connection (rev 01)


Does the above mean I have 10 physical Network cards please?







ethernet






share|improve this question









New contributor




Jack is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.











share|improve this question









New contributor




Jack is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.









share|improve this question




share|improve this question








edited 2 hours ago







Jack













New contributor




Jack is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.









asked 5 hours ago









JackJack

1085




1085




New contributor




Jack is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.





New contributor





Jack is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.






Jack is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.













  • What does the output of ifenslave -a and ip link show and ip addr show look like?

    – Zoredache
    4 hours ago






  • 1





    Does the above mean I have 10 physical Network cards please - Sure looks like it. Not sure which one of your interfaces are actually being used though.

    – Zoredache
    2 hours ago



















  • What does the output of ifenslave -a and ip link show and ip addr show look like?

    – Zoredache
    4 hours ago






  • 1





    Does the above mean I have 10 physical Network cards please - Sure looks like it. Not sure which one of your interfaces are actually being used though.

    – Zoredache
    2 hours ago

















What does the output of ifenslave -a and ip link show and ip addr show look like?

– Zoredache
4 hours ago





What does the output of ifenslave -a and ip link show and ip addr show look like?

– Zoredache
4 hours ago




1




1





Does the above mean I have 10 physical Network cards please - Sure looks like it. Not sure which one of your interfaces are actually being used though.

– Zoredache
2 hours ago





Does the above mean I have 10 physical Network cards please - Sure looks like it. Not sure which one of your interfaces are actually being used though.

– Zoredache
2 hours ago










1 Answer
1






active

oldest

votes


















5














I suspect that eth2, and eth3 are the physical devices that make up the bond0 device. See the master/slave flags. But your system probably has 2 physical interfaces, these are being combined in some kind of fault tolerance, or link aggregation setup. Try looking at the output of these tools which query the physical hardware lspci | grep Ether, or lshw -class network. You probably will see at least 2 interfaces.



bond0: flags=5187<UP,BROADCAST,RUNNING,MASTER,MULTICAST>
eth2: flags=6211<UP,BROADCAST,RUNNING,SLAVE,MULTICAST>
eth3: flags=6211<UP,BROADCAST,RUNNING,SLAVE,MULTICAST>


The contents of the file /proc/net/bonding/bond0 would tell you more.




  • Bonding docs https://wiki.linuxfoundation.org/networking/bonding#ethernet-device-renaming


The bond0.901 is a virtual device allowing for a tagged vlan 901 on bond0.



The bond0.901:1 is just an secondary IP address for the bond0.901 VLAN 901 interface. This is not a real interface, or even a virtual one. This 'interface' is just just a way for ifconfig to show you the second address. But it is a deprecated tool that can give you confusing output like this. Use ip addr, or ip link instead.






share|improve this answer


























  • Thank you! I appended description on my question about lspci results. And, you mentioned VLAN 901, where can I find the VLAN config please, what purpose of this VLAN please.

    – Jack
    2 hours ago






  • 1





    No idea what it is for, and no idea where it is configured. There is no way for me to possibly know what it is for. It is probably something local to your network environment. The location for the configuration is distro specific. On Debian it might be under /etc/network/interfaces, but it might also be under /etc/systemd/network, or maybe one of a dozen other places.

    – Zoredache
    2 hours ago













  • one more question please, should the Switch has 901 Vlan configure, but I didn't find this Vlan in switch.

    – Jack
    1 hour ago











  • Modern Linux systems no longer even install ifconfig and route by default anymore, unless some legacy package gets installed that needs them. It's a good idea to get out of the habit of using them.

    – Michael Hampton
    29 mins ago












Your Answer








StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "2"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);

StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});

function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});


}
});






Jack is a new contributor. Be nice, and check out our Code of Conduct.










draft saved

draft discarded


















StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fserverfault.com%2fquestions%2f963188%2fwhy-one-of-virtual-nics-called-bond0%23new-answer', 'question_page');
}
);

Post as a guest















Required, but never shown

























1 Answer
1






active

oldest

votes








1 Answer
1






active

oldest

votes









active

oldest

votes






active

oldest

votes









5














I suspect that eth2, and eth3 are the physical devices that make up the bond0 device. See the master/slave flags. But your system probably has 2 physical interfaces, these are being combined in some kind of fault tolerance, or link aggregation setup. Try looking at the output of these tools which query the physical hardware lspci | grep Ether, or lshw -class network. You probably will see at least 2 interfaces.



bond0: flags=5187<UP,BROADCAST,RUNNING,MASTER,MULTICAST>
eth2: flags=6211<UP,BROADCAST,RUNNING,SLAVE,MULTICAST>
eth3: flags=6211<UP,BROADCAST,RUNNING,SLAVE,MULTICAST>


The contents of the file /proc/net/bonding/bond0 would tell you more.




  • Bonding docs https://wiki.linuxfoundation.org/networking/bonding#ethernet-device-renaming


The bond0.901 is a virtual device allowing for a tagged vlan 901 on bond0.



The bond0.901:1 is just an secondary IP address for the bond0.901 VLAN 901 interface. This is not a real interface, or even a virtual one. This 'interface' is just just a way for ifconfig to show you the second address. But it is a deprecated tool that can give you confusing output like this. Use ip addr, or ip link instead.






share|improve this answer


























  • Thank you! I appended description on my question about lspci results. And, you mentioned VLAN 901, where can I find the VLAN config please, what purpose of this VLAN please.

    – Jack
    2 hours ago






  • 1





    No idea what it is for, and no idea where it is configured. There is no way for me to possibly know what it is for. It is probably something local to your network environment. The location for the configuration is distro specific. On Debian it might be under /etc/network/interfaces, but it might also be under /etc/systemd/network, or maybe one of a dozen other places.

    – Zoredache
    2 hours ago













  • one more question please, should the Switch has 901 Vlan configure, but I didn't find this Vlan in switch.

    – Jack
    1 hour ago











  • Modern Linux systems no longer even install ifconfig and route by default anymore, unless some legacy package gets installed that needs them. It's a good idea to get out of the habit of using them.

    – Michael Hampton
    29 mins ago
















5














I suspect that eth2, and eth3 are the physical devices that make up the bond0 device. See the master/slave flags. But your system probably has 2 physical interfaces, these are being combined in some kind of fault tolerance, or link aggregation setup. Try looking at the output of these tools which query the physical hardware lspci | grep Ether, or lshw -class network. You probably will see at least 2 interfaces.



bond0: flags=5187<UP,BROADCAST,RUNNING,MASTER,MULTICAST>
eth2: flags=6211<UP,BROADCAST,RUNNING,SLAVE,MULTICAST>
eth3: flags=6211<UP,BROADCAST,RUNNING,SLAVE,MULTICAST>


The contents of the file /proc/net/bonding/bond0 would tell you more.




  • Bonding docs https://wiki.linuxfoundation.org/networking/bonding#ethernet-device-renaming


The bond0.901 is a virtual device allowing for a tagged vlan 901 on bond0.



The bond0.901:1 is just an secondary IP address for the bond0.901 VLAN 901 interface. This is not a real interface, or even a virtual one. This 'interface' is just just a way for ifconfig to show you the second address. But it is a deprecated tool that can give you confusing output like this. Use ip addr, or ip link instead.






share|improve this answer


























  • Thank you! I appended description on my question about lspci results. And, you mentioned VLAN 901, where can I find the VLAN config please, what purpose of this VLAN please.

    – Jack
    2 hours ago






  • 1





    No idea what it is for, and no idea where it is configured. There is no way for me to possibly know what it is for. It is probably something local to your network environment. The location for the configuration is distro specific. On Debian it might be under /etc/network/interfaces, but it might also be under /etc/systemd/network, or maybe one of a dozen other places.

    – Zoredache
    2 hours ago













  • one more question please, should the Switch has 901 Vlan configure, but I didn't find this Vlan in switch.

    – Jack
    1 hour ago











  • Modern Linux systems no longer even install ifconfig and route by default anymore, unless some legacy package gets installed that needs them. It's a good idea to get out of the habit of using them.

    – Michael Hampton
    29 mins ago














5












5








5







I suspect that eth2, and eth3 are the physical devices that make up the bond0 device. See the master/slave flags. But your system probably has 2 physical interfaces, these are being combined in some kind of fault tolerance, or link aggregation setup. Try looking at the output of these tools which query the physical hardware lspci | grep Ether, or lshw -class network. You probably will see at least 2 interfaces.



bond0: flags=5187<UP,BROADCAST,RUNNING,MASTER,MULTICAST>
eth2: flags=6211<UP,BROADCAST,RUNNING,SLAVE,MULTICAST>
eth3: flags=6211<UP,BROADCAST,RUNNING,SLAVE,MULTICAST>


The contents of the file /proc/net/bonding/bond0 would tell you more.




  • Bonding docs https://wiki.linuxfoundation.org/networking/bonding#ethernet-device-renaming


The bond0.901 is a virtual device allowing for a tagged vlan 901 on bond0.



The bond0.901:1 is just an secondary IP address for the bond0.901 VLAN 901 interface. This is not a real interface, or even a virtual one. This 'interface' is just just a way for ifconfig to show you the second address. But it is a deprecated tool that can give you confusing output like this. Use ip addr, or ip link instead.






share|improve this answer















I suspect that eth2, and eth3 are the physical devices that make up the bond0 device. See the master/slave flags. But your system probably has 2 physical interfaces, these are being combined in some kind of fault tolerance, or link aggregation setup. Try looking at the output of these tools which query the physical hardware lspci | grep Ether, or lshw -class network. You probably will see at least 2 interfaces.



bond0: flags=5187<UP,BROADCAST,RUNNING,MASTER,MULTICAST>
eth2: flags=6211<UP,BROADCAST,RUNNING,SLAVE,MULTICAST>
eth3: flags=6211<UP,BROADCAST,RUNNING,SLAVE,MULTICAST>


The contents of the file /proc/net/bonding/bond0 would tell you more.




  • Bonding docs https://wiki.linuxfoundation.org/networking/bonding#ethernet-device-renaming


The bond0.901 is a virtual device allowing for a tagged vlan 901 on bond0.



The bond0.901:1 is just an secondary IP address for the bond0.901 VLAN 901 interface. This is not a real interface, or even a virtual one. This 'interface' is just just a way for ifconfig to show you the second address. But it is a deprecated tool that can give you confusing output like this. Use ip addr, or ip link instead.







share|improve this answer














share|improve this answer



share|improve this answer








edited 4 hours ago

























answered 4 hours ago









ZoredacheZoredache

112k30231379




112k30231379













  • Thank you! I appended description on my question about lspci results. And, you mentioned VLAN 901, where can I find the VLAN config please, what purpose of this VLAN please.

    – Jack
    2 hours ago






  • 1





    No idea what it is for, and no idea where it is configured. There is no way for me to possibly know what it is for. It is probably something local to your network environment. The location for the configuration is distro specific. On Debian it might be under /etc/network/interfaces, but it might also be under /etc/systemd/network, or maybe one of a dozen other places.

    – Zoredache
    2 hours ago













  • one more question please, should the Switch has 901 Vlan configure, but I didn't find this Vlan in switch.

    – Jack
    1 hour ago











  • Modern Linux systems no longer even install ifconfig and route by default anymore, unless some legacy package gets installed that needs them. It's a good idea to get out of the habit of using them.

    – Michael Hampton
    29 mins ago



















  • Thank you! I appended description on my question about lspci results. And, you mentioned VLAN 901, where can I find the VLAN config please, what purpose of this VLAN please.

    – Jack
    2 hours ago






  • 1





    No idea what it is for, and no idea where it is configured. There is no way for me to possibly know what it is for. It is probably something local to your network environment. The location for the configuration is distro specific. On Debian it might be under /etc/network/interfaces, but it might also be under /etc/systemd/network, or maybe one of a dozen other places.

    – Zoredache
    2 hours ago













  • one more question please, should the Switch has 901 Vlan configure, but I didn't find this Vlan in switch.

    – Jack
    1 hour ago











  • Modern Linux systems no longer even install ifconfig and route by default anymore, unless some legacy package gets installed that needs them. It's a good idea to get out of the habit of using them.

    – Michael Hampton
    29 mins ago

















Thank you! I appended description on my question about lspci results. And, you mentioned VLAN 901, where can I find the VLAN config please, what purpose of this VLAN please.

– Jack
2 hours ago





Thank you! I appended description on my question about lspci results. And, you mentioned VLAN 901, where can I find the VLAN config please, what purpose of this VLAN please.

– Jack
2 hours ago




1




1





No idea what it is for, and no idea where it is configured. There is no way for me to possibly know what it is for. It is probably something local to your network environment. The location for the configuration is distro specific. On Debian it might be under /etc/network/interfaces, but it might also be under /etc/systemd/network, or maybe one of a dozen other places.

– Zoredache
2 hours ago







No idea what it is for, and no idea where it is configured. There is no way for me to possibly know what it is for. It is probably something local to your network environment. The location for the configuration is distro specific. On Debian it might be under /etc/network/interfaces, but it might also be under /etc/systemd/network, or maybe one of a dozen other places.

– Zoredache
2 hours ago















one more question please, should the Switch has 901 Vlan configure, but I didn't find this Vlan in switch.

– Jack
1 hour ago





one more question please, should the Switch has 901 Vlan configure, but I didn't find this Vlan in switch.

– Jack
1 hour ago













Modern Linux systems no longer even install ifconfig and route by default anymore, unless some legacy package gets installed that needs them. It's a good idea to get out of the habit of using them.

– Michael Hampton
29 mins ago





Modern Linux systems no longer even install ifconfig and route by default anymore, unless some legacy package gets installed that needs them. It's a good idea to get out of the habit of using them.

– Michael Hampton
29 mins ago










Jack is a new contributor. Be nice, and check out our Code of Conduct.










draft saved

draft discarded


















Jack is a new contributor. Be nice, and check out our Code of Conduct.













Jack is a new contributor. Be nice, and check out our Code of Conduct.












Jack is a new contributor. Be nice, and check out our Code of Conduct.
















Thanks for contributing an answer to Server Fault!


  • Please be sure to answer the question. Provide details and share your research!

But avoid



  • Asking for help, clarification, or responding to other answers.

  • Making statements based on opinion; back them up with references or personal experience.


To learn more, see our tips on writing great answers.




draft saved


draft discarded














StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fserverfault.com%2fquestions%2f963188%2fwhy-one-of-virtual-nics-called-bond0%23new-answer', 'question_page');
}
);

Post as a guest















Required, but never shown





















































Required, but never shown














Required, but never shown












Required, but never shown







Required, but never shown

































Required, but never shown














Required, but never shown












Required, but never shown







Required, but never shown







Popular posts from this blog

Liste der Baudenkmale in Friedland (Mecklenburg)

Single-Malt-Whisky

Czorneboh